기기를 수리하세요 커뮤니티 상점

Turtle Beach Ear Force XO One Speaker Replacement

소개

If you're experiencing poor sound quality, you might need or want to replace your speaker. This guide shows the steps necessary to replace the speaker.

필요한 것

  1. Turtle Beach Ear Force XO One Speaker Replacement, Speaker: 1 단계, 이미지 1/1

    • Start with the ear padding facing up.

    번역하기

  2. Turtle Beach Ear Force XO One Speaker Replacement: 2 단계, 이미지 1/3 Turtle Beach Ear Force XO One Speaker Replacement: 2 단계, 이미지 2/3 Turtle Beach Ear Force XO One Speaker Replacement: 2 단계, 이미지 3/3

    • Remove the ear padding by separating the fabric piece from the plastic headphone piece.

    • The leather padding will slide off the plastic piece holding it in place. Don't be afraid to pull with a little force.

    번역하기

  4. Turtle Beach Ear Force XO One Speaker Replacement: 3 단계, 이미지 1/2 Turtle Beach Ear Force XO One Speaker Replacement: 3 단계, 이미지 2/2

    • Use a Philips head screwdriver to remove the speaker cover.

    • Be careful the speaker is attached to the chip inside by wires.

    • The recommended screwdriver bit size is a PH 0.

    번역하기

    • Once the speaker cover is removed, the wires can be cut or de-soldered.

    • Remove the speaker.

    • Insert the new speaker

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Stephen Reilly

회원 가입일: 10/28/15

128 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

UMass Dartmouth, Team 3-1, Shastany Fall 2015 UMass Dartmouth, Team 3-1, Shastany Fall 2015 회원

UMASSD-SHASTANY-F15S3G1

3 회원들

안내서 6개 작성하였습니다

댓글 한 개

what speaker can i use as a replacement and where can I buy one?

Tristan Williams - 답글

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 11

전체 시간: 2,800