Turtle Beach Recon Controller Back Plate Replacement

소개

This guide will demonstrate how to replace the back plate on your Turtle Beach Recon.

The back plate supports the inside components of your Turtle Beach Recon such as the motherboard. It is often necessary to remove or replace the back plate should it appear to be broken or exposed to water.

필요한 것

1 단계 Back Plate

Turtle Beach Recon Controller Back Plate Replacement, Back Plate: 1 단계, 이미지 1/3

Turtle Beach Recon Controller Back Plate Replacement, Back Plate: 1 단계, 이미지 2/3

Turtle Beach Recon Controller Back Plate Replacement, Back Plate: 1 단계, 이미지 3/3

Use a Phillips #00 screwdriver to remove seven 10 mm screws from the back plate.
When replacing the screws, ensure that the screwdriver is perpendicular to the screw in curved areas.

편집

2 단계

Turtle Beach Recon Controller Back Plate Replacement: 2 단계, 이미지 3/3

Use an opening tool to separate the back plate from the grips of your Turtle Beach Recon.
Use your fingers to remove the back plate from the body of your Turtle Beach Recon.

편집