주요 콘텐츠로 건너뛰기

ULCO ntegrus PSV ventilator Battery Replacement

의료 장비
iFixit과 이 수리 안내서는 의료 기기 제조업체가 보증하지 않으며 제휴 관계가 없습니다.

필요한 것

    • Before disassembly, make sure the front wheel breaks are on.

    • Make sure ALL gas supplies are disconnected and the system has been purged, and make sure all electrical supplies have been disconnected.

  1. ULCO ntegrus PSV ventilator Battery Replacement: 4 단계, 이미지 1/1
    • With one hand on the ventilator removal handle and one holding the lower half of the ventilator, pull up firmly on the handle so that the mounting slides up the slots in the frame.

  2. ULCO ntegrus PSV ventilator Battery Replacement: 5 단계, 이미지 1/1
    • Pull the ventilator housing towards you so that the mounting tabs come out of the frame slots rest the ventilator housing on the plastic skirt at the rear of the workstation as shown in the photo.

  3. ULCO ntegrus PSV ventilator Battery Replacement, Battery: 6 단계, 이미지 1/1
    • Remove the main cover plate from the ventilator enclosure by removing all screws.

    • Disconnect the battery.

  4. ULCO ntegrus PSV ventilator Battery Replacement: 8 단계, 이미지 1/1
    • Remove the four pan head screws (SM0308P) holding down the battery plate (EV9109) and battery (EV9108) and remove the battery plate and battery.

  5. ULCO ntegrus PSV ventilator Battery Replacement: 9 단계, 이미지 1/1
    • Install the new battery in the same location and screw down the battery plate onto the battery plate spacers so that the battery is firmly held in place.

    • Reconnect the battery.

결론

To reassemble your device, follow these instructions in reverse order.

Preston Myers

회원 가입일: 04/09/20

493 평판

안내서 4개 작성하였습니다

Cal Poly, Team S7-G13, Paton Spring 2020 Cal Poly, Team S7-G13, Paton Spring 2020 회원

CPSU-PATON-S20S7G13

3 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 36