주요 콘텐츠로 건너뛰기

UTStarcom CDM8945vw Speaker Replacement

필요한 것

  1. UTStarcom CDM8945vw Speaker Replacement, Battery: 1 단계, 이미지 1/1
    • Push the highlighted button in the direction in which the antenna is pointing. The battery will release and pop up.

  2. UTStarcom CDM8945vw Speaker Replacement: 2 단계, 이미지 1/1
    • Remove the battery.

  3. UTStarcom CDM8945vw Speaker Replacement, Antenna: 3 단계, 이미지 1/1
    • Identify the antenna. It is the extendable plastic component pictured here.

  4. UTStarcom CDM8945vw Speaker Replacement: 4 단계, 이미지 1/1
    • Twist the base in a counter-clockwise motion to unscrew the antenna.

  5. UTStarcom CDM8945vw Speaker Replacement: 5 단계, 이미지 1/2 UTStarcom CDM8945vw Speaker Replacement: 5 단계, 이미지 2/2
    • The antenna should slide right out of the phone when finished.

  6. UTStarcom CDM8945vw Speaker Replacement, Speaker: 6 단계, 이미지 1/1
    • Remove the small rubber grommet using the plastic opening tool.

  7. UTStarcom CDM8945vw Speaker Replacement: 7 단계, 이미지 1/1
    • Remove five screws using a Phillips #00 screwdriver.

  8. UTStarcom CDM8945vw Speaker Replacement: 8 단계, 이미지 1/1
    • Use the plastic opening tool to separate the two pieces that form the outer case of the phone.

    • Prying the two pieces apart may be difficult. Carefully apply a moderate amount of pressure when attempting to separate the two pieces or else you will risk breaking them.

  9. UTStarcom CDM8945vw Speaker Replacement: 9 단계, 이미지 1/1
    • Remove the back piece of the outer case.

  10. UTStarcom CDM8945vw Speaker Replacement: 10 단계, 이미지 1/1
    • Remove the speaker using a plastic opening tool.

    • Apply a small amount of force when removing the broken speaker from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

  11. UTStarcom CDM8945vw Speaker Replacement: 11 단계, 이미지 1/2 UTStarcom CDM8945vw Speaker Replacement: 11 단계, 이미지 2/2
    • Remove the wire attached to the speaker from the motherboard using tweezers.

    • Apply a small amount of force when removing the wire from the motherboard. If you apply a large amount of force, you may rip out the wires and damage the motherboard.

결론

To reassemble your device, follow these instructions in reverse order.

Eli

회원 가입일: 09/27/12

1 평판

안내서 2개 작성하였습니다

Cal Poly, Team 24-26, Regan Fall 2012 Cal Poly, Team 24-26, Regan Fall 2012 회원

CPSU-REGAN-F12S24G26

4 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 337