주요 콘텐츠로 건너뛰기

UTStarcom XV6700 Camera Replacement

필요한 것

  1. UTStarcom XV6700 Camera Replacement, Battery: 1 단계, 이미지 1/1
    • Press the on/off button on the top to power the phone off.

  2. UTStarcom XV6700 Camera Replacement: 2 단계, 이미지 1/1
    • Remove the battery cover by pressing and sliding the cover down and off of the phone.

  3. UTStarcom XV6700 Camera Replacement: 3 단계, 이미지 1/3 UTStarcom XV6700 Camera Replacement: 3 단계, 이미지 2/3 UTStarcom XV6700 Camera Replacement: 3 단계, 이미지 3/3
    • Pull the battery removal tab and lift the battery out of the phone.

    • If the battery removal tab is missing, place a spudger on the opposite side of the highlighted connector and pry the battery up.

  4. UTStarcom XV6700 Camera Replacement, Camera: 4 단계, 이미지 1/1
    • Remove the two 4.0-mm #000 Phillips screws at the top of the battery compartment. Tweezers may be useful to remove the screws.

  5. UTStarcom XV6700 Camera Replacement: 5 단계, 이미지 1/2 UTStarcom XV6700 Camera Replacement: 5 단계, 이미지 2/2
    • Use firm pressure to carefully pry off the cover with your fingers.

  6. UTStarcom XV6700 Camera Replacement: 6 단계, 이미지 1/1
    • Remove the 4.0-mm #00 Phillips screw securing the camera flash circuit board. The board is still connected by a connector on the bottom of the board.

  7. UTStarcom XV6700 Camera Replacement: 7 단계, 이미지 1/1
    • Gently pry off the camera flash circuit board with the spudger.

  8. UTStarcom XV6700 Camera Replacement: 8 단계, 이미지 1/1
    • Gently pry off the camera with the spudger.

결론

To reassemble your device, follow these instructions in reverse order.

Jesse Walker

회원 가입일: 06/04/13

201 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 175