UnBranded UB-15MS10 Back Panel Replacement - iFixit 수리 안내서

소개

The following steps show you the basics to opening up the device.

필요한 것

1 단계 Back Panel

UnBranded UB-15MS10 Back Panel Replacement, Back Panel: 1 단계, 이미지 1/1

Remove the cover over the Micro SD outlet by using a plastic opening tool to pry open and push out the cover panel.

2 단계

UnBranded UB-15MS10 Back Panel Replacement: 2 단계, 이미지 1/1

Remove the two 4-mm #0 screws from the inside of the Micro SD compartment.

3 단계

UnBranded UB-15MS10 Back Panel Replacement: 3 단계, 이미지 1/2

UnBranded UB-15MS10 Back Panel Replacement: 3 단계, 이미지 2/2

Insert blue guitar picks in the crease between the top and bottom panels starting on the same end as the Micro SD slot.
Inserting the picks directly under the Micro SD compartment was the easiest place to get started. It still requires some force.

4 단계

UnBranded UB-15MS10 Back Panel Replacement: 4 단계, 이미지 1/1

Insert the black spudger between the guitar picks in order to pry open gaps between the blue guitar picks.
As the gaps open, slide the guitar picks along the sides to separate the panels.

5 단계

UnBranded UB-15MS10 Back Panel Replacement: 5 단계, 이미지 1/1

Pry all four sides apart using the blue guitar picks and the black spudger until they can easily be pried apart by hand.

결론

To reassemble your device, follow these instructions in reverse order.

다른 8명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 4명과 함께

Andrea Hammans

회원 가입일: 09/16/15

579 평판

안내서 1개 작성함

배지 +9개 더

팀

IUPUI, Team 2-1, Baechle Fall 2015 IUPUI, Team 2-1, Baechle Fall 2015 회원

IUPUI-BAECHLE-F15S2G1

3 회원들

안내서 3개 작성하였습니다

댓글 한 개

Thanks you, work good for me.

Cesar Alvarez - 2016년 8월 9일 답글

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 1,294