기기를 수리하세요 커뮤니티 상점

Uniden D1688 multistation and handset disassembly

소개

We will teach you how to successfully take apart the phone system to do any repairs and be able to fully but it back together.

필요한 것

  1. Uniden D1688 multistation and handset disassembly, Uniden D1688 multistation and handset disassembly: 1 단계, 이미지 1/1

    • Unplug the phone from the base by detaching the RJ-11 plug.

    • Flip the base upside down, and use the Phillips #01 screwdriver to unscrew the seven screws (Head size: 5.11mm, length: 8.6mm) on the underside of the base.

    편집

  2. Uniden D1688 multistation and handset disassembly: 2 단계, 이미지 1/1

    • Using the spudger, separate the top shell of the base from the bottom shell from the base.

    • Use care when separating the base so the ribbon cable between the top shell circuit board and the bottom shell circuit board is not damaged!

    편집

  3. Uniden D1688 multistation and handset disassembly: 3 단계, 이미지 1/1

    • Unscrew the 3 screws (Head Size: 4mm Length: 8.6 mm) from the top shell circuit board.

    편집

  4. Uniden D1688 multistation and handset disassembly: 4 단계, 이미지 1/1

    • Unscrew the 2 screws (Head Size: 4mm Length: 8.66) on the small circuit board in the top shell.

    편집

  5. Uniden D1688 multistation and handset disassembly: 5 단계, 이미지 1/1

    • Disconnect the ribbon cable from the bottom shell circuit board.

    편집

  7. Uniden D1688 multistation and handset disassembly: 6 단계, 이미지 1/1

    • Release the speaker from the locking pin by pushing down on each ending side of the pin and pushing it away from the speaker.

    편집

  8. Uniden D1688 multistation and handset disassembly: 7 단계, 이미지 1/1

    • Remove rubber keyboard underlay from top shell.

    편집

  9. Uniden D1688 multistation and handset disassembly: 8 단계, 이미지 1/1

    • Push the plastic keyboard pieces out of the top shell.

    편집

  10. Uniden D1688 multistation and handset disassembly: 9 단계, 이미지 1/1

    • Unscrew bottom shell circuit board screws (Head size: 4mm Length: 8.6mm).

    편집

  11. Uniden D1688 multistation and handset disassembly: 10 단계, 이미지 1/1

    • The disassembly of the phone base is complete!

    • Now this guide will move on to taking apart one of the handsets.

    편집

  12. Uniden D1688 multistation and handset disassembly: 11 단계, 이미지 1/1

    • Slide the battery cover off of the handset, and unplug the battery.

    편집

  13. Uniden D1688 multistation and handset disassembly: 12 단계, 이미지 1/1

    • Remove the battery, and unscrew the two screws (Head Size: 4mm Length: 8.6 mm).

    편집

  14. Uniden D1688 multistation and handset disassembly: 13 단계, 이미지 1/1

    • Use spudger to separate the phone shell.

    편집

  15. Uniden D1688 multistation and handset disassembly: 14 단계, 이미지 1/1

    • Unscrew the two screws (Head Size: 4mm Length: 8.6mm) on the bottom shell keeping the speaker locking pin in place.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 7명과 함께

Nicholas Weeks

회원 가입일: 01/27/15

101 평판

안내서 1개 작성함

배지: 3

팀

Pasco Hernando, Team 1-4, Prince Winter 2015 Pasco Hernando, Team 1-4, Prince Winter 2015 회원

PHSC-PRINCE-W15S1G4

6 회원들

안내서 10개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 8

전체 시간: 530