기기를 수리하세요 커뮤니티 상점

Urge Basics Soundbrick Speaker Woofer Replacement

소개

This guide will teach you how to replace a malfunctioning internal woofer of the Urge Basics Soundbrick portable speaker. This replacement can take place at anytime as long as there is plenty of light. To complete this repair, the you will need a Phillips #1 Screwdriver, the replacement woofers, and the Urge Basics Soundbrick.

필요한 것

  1. Urge Basics Soundbrick Speaker Woofer Replacement, Speaker Woofer: 1 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement, Speaker Woofer: 1 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement, Speaker Woofer: 1 단계, 이미지 3/3

    • Flip the speaker upside down.

    • Unscrew the middle screw with a Philips #1 screwdriver.

    편집

  2. Urge Basics Soundbrick Speaker Woofer Replacement: 2 단계, 이미지 1/2 Urge Basics Soundbrick Speaker Woofer Replacement: 2 단계, 이미지 2/2

    • Peel off the two gray tabs to expose the four inner Philips #1 screws.

    편집

  3. Urge Basics Soundbrick Speaker Woofer Replacement: 3 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement: 3 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement: 3 단계, 이미지 3/3

    • Unscrew all four screws with a Philips #1 screwdriver.

    • The screws are deep and can be difficult to take out.

    편집

  4. Urge Basics Soundbrick Speaker Woofer Replacement: 4 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement: 4 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement: 4 단계, 이미지 3/3

    • Flip the speaker so that the ports are facing up.

    • Unfold the speaker's cover away from the body.

    편집

  6. Urge Basics Soundbrick Speaker Woofer Replacement: 5 단계, 이미지 1/2 Urge Basics Soundbrick Speaker Woofer Replacement: 5 단계, 이미지 2/2

    • Remove the two Phillips #1 screws found on each side of the battery compartment.

    • Removal of battery compartment is necessary to prevent electric shock when replacing the woofer.

    편집

  7. Urge Basics Soundbrick Speaker Woofer Replacement: 6 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement: 6 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement: 6 단계, 이미지 3/3

    • Disconnect the battery connectors attached to the circuit board by unplugging them.

    편집

  8. Urge Basics Soundbrick Speaker Woofer Replacement: 7 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement: 7 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement: 7 단계, 이미지 3/3

    • Disconnect the ribbon cable from the battery by carefully pulling it out.

    • Remove the battery compartment.

    편집

  9. Urge Basics Soundbrick Speaker Woofer Replacement: 8 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement: 8 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement: 8 단계, 이미지 3/3

    • Disconnect the adjacent connector from the main circuit board.

    편집

  10. Urge Basics Soundbrick Speaker Woofer Replacement: 9 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement: 9 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement: 9 단계, 이미지 3/3

    • Disconnect the woofer's two connectors from the main circuit board.

    편집

  11. Urge Basics Soundbrick Speaker Woofer Replacement: 10 단계, 이미지 1/3 Urge Basics Soundbrick Speaker Woofer Replacement: 10 단계, 이미지 2/3 Urge Basics Soundbrick Speaker Woofer Replacement: 10 단계, 이미지 3/3

    • Remove the two Phillips #1 screws keeping each woofer in place.

    • Carefully remove the woofers and replace them with new ones.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Itzel Urueta

회원 가입일: 04/28/17

125 평판

안내서 1개 작성함

배지: 4

+1개 배지 추가

팀

UC Davis, Team S2-G4, Cole Spring 2017 UC Davis, Team S2-G4, Cole Spring 2017 회원

UCD-COLE-S17S2G4

3 회원들

안내서 1개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 3

전체 시간: 865