소개
Use this guide to remove and replace the button and circuit board used for taking photos
필요한 것
-
-
Locate the four plastic screw covers denoted by the markers and gently pry them up with the metal spudger.
-
-
-
-
Remove the purple plastic that covers the button and circuit board. It should slide right out from the slot it sits in.
-
거의 끝나갑니다!
To reassemble your device, follow these instructions in reverse order.
결론
To reassemble your device, follow these instructions in reverse order.
다른 한 분이 해당 안내서를 완성하였습니다.