주요 콘텐츠로 건너뛰기

VTech Kidizoom Smartwatch DX2 Wristband Replacement

필요한 것

  1. VTech Kidizoom Smartwatch DX2 Wristband Replacement, Wristband: 1 단계, 이미지 1/1
    • Begin by placing the watch on its side.

  2. VTech Kidizoom Smartwatch DX2 Wristband Replacement: 2 단계, 이미지 1/1
    • Next, use the flat end of the spudger to wedge between the small-headed pin (located on the band closest to the watch) to pull the pin up through the other side.

  3. VTech Kidizoom Smartwatch DX2 Wristband Replacement: 3 단계, 이미지 1/1
    • Pull the pin out, however not fully, feeling slight resistance is normal.

  4. VTech Kidizoom Smartwatch DX2 Wristband Replacement: 4 단계, 이미지 1/1
    • Finally, pull the wristband off. Repeat on the opposite side of the watch if necessary.

결론

To reassemble your device, follow these instructions in reverse order.

Sydney

회원 가입일: 10/25/18

323 평판

안내서 2개 작성하였습니다

UMass Dartmouth, Team S3-G5, Peak Fall 2018 UMass Dartmouth, Team S3-G5, Peak Fall 2018 회원

UMASSD-PEAK-F18S3G5

4 회원들

안내서 7개 작성하였습니다

댓글 한 개

My Vtech DX2 had a split pin. One side of the pin was the long side and the other very very short. So look out for that. Thanks for this tutorial, was very helpful.

Ryan Laurel - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 41

전체 시간: 7,194