주요 콘텐츠로 건너뛰기

VTech Safe And Sound DM221 Speaker Replacement

필요한 것

  1. VTech Safe And Sound DM221 Speaker Replacement, Speaker: 1 단계, 이미지 1/1
    • Remove the battery cover.

  2. VTech Safe And Sound DM221 Speaker Replacement: 2 단계, 이미지 1/1
    • Unplug the battery from its connector and remove.

  3. VTech Safe And Sound DM221 Speaker Replacement: 3 단계, 이미지 1/1
    • Using the Phillips #00 screwdriver, unscrew the two 5.0 mm Phillips #00 screws at the bottom of the monitor.

  4. VTech Safe And Sound DM221 Speaker Replacement: 4 단계, 이미지 1/1
    • Separate the back half of the device from the front using the metal spudger.

  5. VTech Safe And Sound DM221 Speaker Replacement: 5 단계, 이미지 1/1
    • Remove the two 5.0 mm Phillips #00 screws at the top of the device which holds the antenna at the top of the motherboard.

    • This will allow the removal of the silver handle.

  6. VTech Safe And Sound DM221 Speaker Replacement: 6 단계, 이미지 1/1
    • Remove the “TALK” button to get access to remove the motherboard.

  7. VTech Safe And Sound DM221 Speaker Replacement: 7 단계, 이미지 1/1
    • Push down on the antenna, located on the top of the motherboard.

  8. VTech Safe And Sound DM221 Speaker Replacement: 8 단계, 이미지 1/1
    • Gently remove the motherboard away from the monitor.

    • Be careful not to disconnect the red wire.

  9. VTech Safe And Sound DM221 Speaker Replacement: 9 단계, 이미지 1/1
    • Use the plastic spudger to push the two white plastic tabs, at the bottom of the device, up to release the metal retaining clip.

결론

To reassemble your device, follow these instructions in reverse order.

Krystal

회원 가입일: 10/01/15

600 평판

안내서 5개 작성하였습니다

USF Tampa, Team 1-5, Leahy Fall 2015 USF Tampa, Team 1-5, Leahy Fall 2015 회원

USFT-LEAHY-F15S1G5

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 2

전체 시간: 329