1. Flip laptop over so that "Service TAG" is at the top left.
    • Flip laptop over so that "Service TAG" is at the top left.

  2. Remove screw at bottom right hand corner.
    • Remove screw at bottom right hand corner.

  3. US$100.00 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Remove plate by pushing lightly and sliding to the right.
    • Remove plate by pushing lightly and sliding to the right.

  5. Unscrew 4 screws around hard drive. Unscrew 4 screws around hard drive.
    • Unscrew 4 screws around hard drive.

  6. Remove hard drive by pulling upwards on right side of drive
    • Remove hard drive by pulling upwards on right side of drive

    • When inserting new hard drive note that there is a slot on the left where the hard drive port slides into.

결론

To reassemble your device, follow these instructions in reverse order.

Chris Griffin

회원 가입일: 2014년 03월 12일

110 평판

안내서 1개 작성함

University of Maryland, Team 2-6, Vijaybhaskar Spring 2014 University of Maryland, Team 2-6, Vijaybhaskar Spring 2014 회원

UMD-VIJAYBHASKAR-S14S2G6

4 회원들

안내서 4개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 0

전체 시간: 107