주요 콘텐츠로 건너뛰기

Verizon M1424WR Capacitor Replacement

필요한 것

  1. Verizon M1424WR Capacitor Replacement, Motherboard: 1 단계, 이미지 1/1
    • Flip the device so that the bottom is facing up.

  2. Verizon M1424WR Capacitor Replacement: 2 단계, 이미지 1/3 Verizon M1424WR Capacitor Replacement: 2 단계, 이미지 2/3 Verizon M1424WR Capacitor Replacement: 2 단계, 이미지 3/3
    • Warning: The design and location of the plastic clips holding this shroud make it extremely difficult to release. Take your time and use a second pry tool if necessary.

    • Insert the plastic-opening tool under the silver labeled casing.

    • Carefully pry at different intervals around the silver labeled casing to separate the silver casing from the top and bottom casing.

  3. Verizon M1424WR Capacitor Replacement: 3 단계, 이미지 1/2 Verizon M1424WR Capacitor Replacement: 3 단계, 이미지 2/2
    • Unscrew the five 10-mm screws on the bottom of the router using a Phillips #0 screwdriver.

  4. Verizon M1424WR Capacitor Replacement: 4 단계, 이미지 1/2 Verizon M1424WR Capacitor Replacement: 4 단계, 이미지 2/2
    • Use a plastic-opening tool and pry the top casing from the bottom casing to expose the circuit board in the bottom half of the device.

  5. Verizon M1424WR Capacitor Replacement: 5 단계, 이미지 1/3 Verizon M1424WR Capacitor Replacement: 5 단계, 이미지 2/3 Verizon M1424WR Capacitor Replacement: 5 단계, 이미지 3/3
    • Locate the two 10-mm screws on either side of the circuit board.

    • Unscrew the two 10-mm screws using a Phillips #0 screwdriver.

    • Keep track of the red rubber washer you remove from underneath one of the screws.

  6. Verizon M1424WR Capacitor Replacement: 6 단계, 이미지 1/1
    • Lift the front of the circuit board up from the bottom casing.

  7. Verizon M1424WR Capacitor Replacement: 7 단계, 이미지 1/1
    • Pull the circuit board towards you until it is separate from the bottom casing.

  8. Verizon M1424WR Capacitor Replacement, Capacitor: 8 단계, 이미지 1/1
    • Locate the capacitor.

  9. Verizon M1424WR Capacitor Replacement: 9 단계, 이미지 1/1
    • Flip the circuit board over.

    • Locate the two prongs on the flip side that are attached to the capacitor on the top side.

  10. Verizon M1424WR Capacitor Replacement: 10 단계, 이미지 1/3 Verizon M1424WR Capacitor Replacement: 10 단계, 이미지 2/3 Verizon M1424WR Capacitor Replacement: 10 단계, 이미지 3/3
    • Touch the hot soldering iron to each prong in order to melt the solder around them.

    • Flip the circuit board and pull out the capacitor from its place while the solder is still hot.

    • For help with soldering techniques, click here.

  11. Verizon M1424WR Capacitor Replacement, Reassembly: 11 단계, 이미지 1/3 Verizon M1424WR Capacitor Replacement, Reassembly: 11 단계, 이미지 2/3 Verizon M1424WR Capacitor Replacement, Reassembly: 11 단계, 이미지 3/3
    • Insert the new capacitor through the circuit board so that the prongs are exposed on the flip side.

    • Heat the prongs up with the soldering iron and touch a soldering wire to the hot prongs to attach the capacitor to the board.

결론

To reassemble your device, follow Steps 1-7 in reverse order.

Jeffrey Fox

회원 가입일: 09/17/14

347 평판

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 8

전체 시간: 564