기기를 수리하세요 커뮤니티 상점

Vizio SmartCast Tablet Remote XR6P Battery Replacement

소개

One of the most common problems with the SmartCast Tablet is a defective battery. When removing the battery from the device, be extra cautious with the wiring harness as you can easily damage the plug.

필요한 것

  1. Vizio SmartCast Tablet Remote XR6P Battery Replacement, Battery: 1 단계, 이미지 1/1

    • Obtain the black plastic spudger tool from the iFixit toolkit. Position the device as shown in the picture. Insert the flat end of the spudger directly in the space above the power button between the back cover and front screen.

    편집

  2. Vizio SmartCast Tablet Remote XR6P Battery Replacement: 2 단계, 이미지 1/1

    • Gently pry up on the plate with the spudger. You may hear some cracking noises as you work the spudger around your device, this is normal.

    편집

  4. Vizio SmartCast Tablet Remote XR6P Battery Replacement: 3 단계, 이미지 1/1

    • Pry around the edges of the tablet with your fingers until you have successfully removed the back of the device. Take the back cover off to access the battery.

    편집

  5. Vizio SmartCast Tablet Remote XR6P Battery Replacement: 4 단계, 이미지 1/3 Vizio SmartCast Tablet Remote XR6P Battery Replacement: 4 단계, 이미지 2/3 Vizio SmartCast Tablet Remote XR6P Battery Replacement: 4 단계, 이미지 3/3

    • The battery will be easy to identify because it has yellow tape around it. For this step, you will need the black spudger tool. Stick the pointy end of the spudger under the bottom right corner of the battery. Pry the battery up breaking the adhesive glue.

    • Set the battery down until you remove the wires connecting the battery to the device in the next step.

    편집

  6. Vizio SmartCast Tablet Remote XR6P Battery Replacement: 5 단계, 이미지 1/3 Vizio SmartCast Tablet Remote XR6P Battery Replacement: 5 단계, 이미지 2/3 Vizio SmartCast Tablet Remote XR6P Battery Replacement: 5 단계, 이미지 3/3

    • Obtain the Torx T5 screwdriver bit and ratchet from the toolkit. Locate the two 3mm black metal screws located on each side of the silver metal bracket holding the wire harness in place. Remove both screws releasing the metal bracket and set it aside.

    편집

  7. Vizio SmartCast Tablet Remote XR6P Battery Replacement: 6 단계, 이미지 1/1

    • Obtain the black spudger from the toolkit and place the flat edge under the wire harness between the wires and back of the device. Gently pry upwards at an angle until the plug comes out of the harness. You may now safely remove the battery from the device.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Jordan Adams

회원 가입일: 10/04/18

445 평판

안내서 4개 작성하였습니다

배지: 4

+1개 배지 추가

팀

Linn Benton Community College, Team S2-G5, Karnes Fall 2018 Linn Benton Community College, Team S2-G5, Karnes Fall 2018 회원

LBCC-KARNES-F18S2G5

3 회원들

안내서 12개 작성하였습니다

댓글 2개

Great instructions.

Now the problem is:

Where do you purchase one of these batteries?

Rick Allen - 답글

Were you able to find a replacement battery???

Brian Wilson - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 3

30일 전: 6

전체 시간: 1,458