기기를 수리하세요 커뮤니티 상점

WRS315SDHW Auger Motor Replacement

소개

Use this guide to replace the auger motor in your Whirlpool WRS315SDHW Refrigerator.

The auger motor drives ice toward the dispenser. If your refrigerator isn't making or dispensing ice properly, the auger motor might be broken.

Note: Some photos show the doors removed for clarity purposes. Removing them is not required and will not change the procedure.

필요한 것

  1. WRS315SDHW Auger Motor Replacement, Safety precautions: 1 단계, 이미지 1/1

    • Before you begin your repair, perform the following:

    • Turn off your main water supply

    • Unplug your device

    편집

  2. WRS315SDHW Auger Motor Replacement, Open the doors: 2 단계, 이미지 1/3 WRS315SDHW Auger Motor Replacement, Open the doors: 2 단계, 이미지 2/3 WRS315SDHW Auger Motor Replacement, Open the doors: 2 단계, 이미지 3/3

    • Depending on your repair, open one or both doors.

    편집

  3. WRS315SDHW Auger Motor Replacement, Remove the icemaker tray: 3 단계, 이미지 1/2 WRS315SDHW Auger Motor Replacement, Remove the icemaker tray: 3 단계, 이미지 2/2

    • Pull the icemaker tray completely out of its slot in the chassis.

    편집

  4. WRS315SDHW Auger Motor Replacement, Unfasten the icemaker assembly: 4 단계, 이미지 1/2 WRS315SDHW Auger Motor Replacement, Unfasten the icemaker assembly: 4 단계, 이미지 2/2

    • Use a 1/4 inch socket wrench to remove the three screws securing the icemaker assembly (shown with the assembly removed):

    • Two 23.9 mm-long screws

    • One 16.7 mm-long screw

    편집

  5. WRS315SDHW Auger Motor Replacement, Reposition the icemaker assembly: 5 단계, 이미지 1/3 WRS315SDHW Auger Motor Replacement, Reposition the icemaker assembly: 5 단계, 이미지 2/3 WRS315SDHW Auger Motor Replacement, Reposition the icemaker assembly: 5 단계, 이미지 3/3

    • Pull the icemaker assembly toward the right edge of the refrigerator to release it from its slot in the chassis.

    • Let the icemaker assembly hang to access its connector.

    편집

  6. WRS315SDHW Auger Motor Replacement, Disconnect the icemaker assembly: 6 단계, 이미지 1/3 WRS315SDHW Auger Motor Replacement, Disconnect the icemaker assembly: 6 단계, 이미지 2/3 WRS315SDHW Auger Motor Replacement, Disconnect the icemaker assembly: 6 단계, 이미지 3/3

    • Disconnect the spade connector attached to the icemaker assembly.

    편집

  8. WRS315SDHW Auger Motor Replacement, Remove the icemaker assembly: 7 단계, 이미지 1/1

    • Remove the icemaker assembly.

    편집

  9. WRS315SDHW Auger Motor Replacement, Unfasten the icemaker auger assembly: 8 단계, 이미지 1/1

    • Use a 1/4 inch socket wrench to remove the four screws securing the icemaker auger assembly:

    • Two 24.1 mm-long screws

    • Two 16.5 mm-long screws

    편집

  10. WRS315SDHW Auger Motor Replacement, Reposition the icemaker auger assembly: 9 단계, 이미지 1/3 WRS315SDHW Auger Motor Replacement, Reposition the icemaker auger assembly: 9 단계, 이미지 2/3 WRS315SDHW Auger Motor Replacement, Reposition the icemaker auger assembly: 9 단계, 이미지 3/3

    • Pull the icemaker auger assembly off of its slot in the chassis.

    • Let the assembly hang to access its connector.

    편집

  11. WRS315SDHW Auger Motor Replacement, Disconnect the icemaker auger assembly: 10 단계, 이미지 1/3 WRS315SDHW Auger Motor Replacement, Disconnect the icemaker auger assembly: 10 단계, 이미지 2/3 WRS315SDHW Auger Motor Replacement, Disconnect the icemaker auger assembly: 10 단계, 이미지 3/3

    • Use a flathead screwdriver, or a similar tool, to compress the connector attached to the icemaker auger assembly.

    • Use your hands to disconnect the assembly connector.

    편집

  12. WRS315SDHW Auger Motor Replacement, Remove the icemaker auger assembly: 11 단계, 이미지 1/1

    • Remove the icemaker auger assembly.

    편집

  13. WRS315SDHW Auger Motor Replacement, Remove the auger fin: 12 단계, 이미지 1/3 WRS315SDHW Auger Motor Replacement, Remove the auger fin: 12 단계, 이미지 2/3 WRS315SDHW Auger Motor Replacement, Remove the auger fin: 12 단계, 이미지 3/3

    • Twist the auger fin clockwise until it separates from the assembly.

    • Remove the auger fin.

    편집

  14. WRS315SDHW Auger Motor Replacement, Unfasten the grounding wire: 13 단계, 이미지 1/1

    • Use a 1/4 inch socket wrench, or a flathead screwdriver, to remove the 11.6 mm-long screw securing the grounding wire.

    편집

  15. WRS315SDHW Auger Motor Replacement, Unfasten the auger motor: 14 단계, 이미지 1/1

    • Use a 1/4 inch socket wrench to remove the three 16.7 mm-long screws securing the auger motor.

    편집

  16. WRS315SDHW Auger Motor Replacement, Disconnect the auger motor: 15 단계, 이미지 1/2 WRS315SDHW Auger Motor Replacement, Disconnect the auger motor: 15 단계, 이미지 2/2

    • Use needle nose pliers, or your hands, to disconnect the grounding wire from the auger motor.

    편집

  17. WRS315SDHW Auger Motor Replacement: 16 단계, 이미지 1/3 WRS315SDHW Auger Motor Replacement: 16 단계, 이미지 2/3 WRS315SDHW Auger Motor Replacement: 16 단계, 이미지 3/3

    • Disconnect the two spade connectors attached to the auger motor.

    편집

  18. WRS315SDHW Auger Motor Replacement, Only the auger motor remains: 17 단계, 이미지 1/1

    • You're now left with the auger motor.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 2명과 함께

nicO

회원 가입일: 04/14/15

15,927 평판

안내서 88개 작성하였습니다

배지: 36

배지 +33개 더

팀

Global Fixers Global Fixers 회원

Community

33 회원들

안내서 581개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 2

30일 전: 10

전체 시간: 124