주요 콘텐츠로 건너뛰기
Wahl Professional Designer Power Switch Replacement

Wahl Professional Designer Power Switch Replacement

Sophia Swearengin

Sophia Swearengin다른 한 명의 기여자

최종 수정일 July 15, 2024

5 분
조정

Use this guide to replace the power switch on your device.

필요한 것

도구

  1. Wahl Professional Designer Power Switch Replacement, Power Switch: 1 단계, 이미지 2개 중 1개 Wahl Professional Designer Power Switch Replacement, Power Switch: 1 단계, 이미지 2개 중 2개
    • Unscrew the 12 mm Phillips head screws located at the top of the cover and at the bottom two corners, using a Phillips #1 Screwdriver.

  2. Wahl Professional Designer Power Switch Replacement: 2 단계, 이미지 2개 중 1개 Wahl Professional Designer Power Switch Replacement: 2 단계, 이미지 2개 중 2개
    • Unscrew the two black 5.556 mm Phillip head screw on the power switch with a Phillips #0 Screwdriver.

  3. Wahl Professional Designer Power Switch Replacement: 3 단계, 이미지 3개 중 1개 Wahl Professional Designer Power Switch Replacement: 3 단계, 이미지 3개 중 2개 Wahl Professional Designer Power Switch Replacement: 3 단계, 이미지 3개 중 3개
    • Shimmy the power switch off the mount until it is completely removed.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

1다른 기여자 명과 함께

Sophia Swearengin

회원 가입일: 09/26/17

790 평판

안내서 5개를 작성함

USF Tampa, Team S14-G5, Boczar Fall 2017 USF Tampa, Team S14-G5, Boczar Fall 2017 회원

USFT-BOCZAR-F17S14G5

2 회원들

안내서 10개를 작성함

댓글 한 개

Hello Mrs/ms Swearengin, I’m disassembled my Wahl desingner I’m unable to make the power switch stiff . It’s very loose I can’t recall which screw goes in between two black 5.556 mm Phillip head screw or if it needs a screw at all

Carlos Olvera - 답글

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 5

지난 30일: 11

전체 시간: 685