주요 콘텐츠로 건너뛰기

Water Damage on main board of Nokia 206 RM873

필요한 것

  1. Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 1 단계, 이미지 1/3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 1 단계, 이미지 2/3 Water Damage on main board of Nokia 206 RM873, Water Damage on main board of Nokia 206 RM873: 1 단계, 이미지 3/3
    • Remove back cover & battery.

  2. Water Damage on main board of Nokia 206 RM873: 2 단계, 이미지 1/2 Water Damage on main board of Nokia 206 RM873: 2 단계, 이미지 2/2
    • Remove the front case by prying it open. You will hear clicks.

    • Be careful with taking off screen if you use a spudger.

  3. Water Damage on main board of Nokia 206 RM873: 3 단계, 이미지 1/2 Water Damage on main board of Nokia 206 RM873: 3 단계, 이미지 2/2
    • Use a Torx screwdriver to remove the screen screws.

    • Use a spudger or tweezers to remove the connector of the LCD screen.

  4. Water Damage on main board of Nokia 206 RM873: 4 단계, 이미지 1/3 Water Damage on main board of Nokia 206 RM873: 4 단계, 이미지 2/3 Water Damage on main board of Nokia 206 RM873: 4 단계, 이미지 3/3
    • Remove keyboard by prying it open with a spudger.

    • The keyboard is secured with adhesive, be careful!

  5. Water Damage on main board of Nokia 206 RM873: 5 단계, 이미지 1/3 Water Damage on main board of Nokia 206 RM873: 5 단계, 이미지 2/3 Water Damage on main board of Nokia 206 RM873: 5 단계, 이미지 3/3
    • The PCB board had water damage, see this in picture 3.

    • To remove the corrosion, dab a cotton swab with a little distilled water on the corroded area, the corrosion will disappear.

  6. Water Damage on main board of Nokia 206 RM873: 6 단계, 이미지 1/2 Water Damage on main board of Nokia 206 RM873: 6 단계, 이미지 2/2
    • How and where to use the cotton swabs.

결론

To reassemble your device, follow these instructions in reverse order.

다른 16명이 해당 안내서를 완성하였습니다.

Kevin D

회원 가입일: 05/02/14

7,276 평판

안내서 21개 작성하였습니다

댓글 4개

no use .it is not switching on . replaced with good batter also. no on

nabhan75 - 답글

try to clean with an ultrasonic bath.

measure out powerrail.

measure out the voltage coming in on board. try to see if you have short.

Kevin D - 답글

Nokia 206 display and charger pin

Mithilesh Yadav - 답글

Not working kiy 1.2.3 and colling ricev kiy not working

K .M Jugesh - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 26

전체 시간: 10,767