주요 콘텐츠로 건너뛰기

Wii Balance Board Foot Replacement

필요한 것

  1. Wii Balance Board Foot Replacement, Unscrewing the Foot Cover: 1 단계, 이미지 1/1
    • Flip device upside-down so the plastic white board is facing the ground.

    • Locate the four feet in the corners of the Balance Board.

    • Unscrew the three 12.7 mm Phillips screws from each foot cover.

  2. Wii Balance Board Foot Replacement, Removing the Foot Cover: 2 단계, 이미지 1/1
    • Remove the gray plastic ring from the actual foot by lifting it up.

  3. Wii Balance Board Foot Replacement, Removing the Foot: 3 단계, 이미지 1/1
    • Separate the loose foot from the device by lifting it up.

  4. Wii Balance Board Foot Replacement, Removing the Additional Feet: 4 단계, 이미지 1/1
    • Repeat steps two and three on the remaining four feet.

결론

To reassemble your device, follow these instructions in reverse order.

Cory Olson

회원 가입일: 09/29/14

891 평판

안내서 4개 작성하였습니다

Cal Poly, Team 13-8, Forte Fall 2014 Cal Poly, Team 13-8, Forte Fall 2014 회원

CPSU-FORTE-F14S13G8

5 회원들

안내서 15개 작성하였습니다

댓글 2개

I am in need of a foot cover. Where can I find one??

Marvin Hopper - 답글

This manual did not help

nbrown1959.nb - 답글

댓글 쓰기

조회 통계:

24 시간 전: 3

7일 전: 15

30일 전: 40

전체 시간: 2,918