기기를 수리하세요 커뮤니티 상점

Wolf Gourmet WGBL100S Power Cord Replacement

소개

If your power cord is broken and your blender will not turn on, follow these steps to replace it.

필요한 것

  1. Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: 1 단계, 이미지 1/2 Wolf Gourmet WGBL100S Power Cord Replacement, Power Cord: 1 단계, 이미지 2/2

    • With the bottom of the blender facing up, use a Phillips #2 screwdriver to remove the 4, 1/2 inch long screws in the corners of the device.

    • Ensure the blender is off and unplugged before starting.

    번역하기

  2. Wolf Gourmet WGBL100S Power Cord Replacement: 2 단계, 이미지 1/2 Wolf Gourmet WGBL100S Power Cord Replacement: 2 단계, 이미지 2/2

    • Using a metal spudger, pry up one side of each of the rubber feet.

    • Note that one side of each foot is glued down; pry up the non-glued side.

    번역하기

  3. Wolf Gourmet WGBL100S Power Cord Replacement: 3 단계, 이미지 1/1

    • Using the same Phillips #2 screwdriver, unscrew the 1/2 inch long screw under each of the feet.

    번역하기

  4. Wolf Gourmet WGBL100S Power Cord Replacement: 4 단계, 이미지 1/2 Wolf Gourmet WGBL100S Power Cord Replacement: 4 단계, 이미지 2/2

    • Pull off the base and remove the plastic housing underneath.

    번역하기

  6. Wolf Gourmet WGBL100S Power Cord Replacement: 5 단계, 이미지 1/2 Wolf Gourmet WGBL100S Power Cord Replacement: 5 단계, 이미지 2/2

    • On the underside of the base, unscrew the three 3/8" long screws on the plastic piece holding the power cord in place using a Phillips #1 screwdriver.

    • Pull the plastic cover off.

    번역하기

  7. Wolf Gourmet WGBL100S Power Cord Replacement: 6 단계, 이미지 1/1

    • Using a wire cutter, cut the three wires of the power cord.

    번역하기

  8. Wolf Gourmet WGBL100S Power Cord Replacement: 7 단계, 이미지 1/2 Wolf Gourmet WGBL100S Power Cord Replacement: 7 단계, 이미지 2/2

    • Pull the cut power cord through the base.

    • Then thread the replacement cord back through and re-attach the plastic cover.

    번역하기

  9. Wolf Gourmet WGBL100S Power Cord Replacement: 8 단계, 이미지 1/3 Wolf Gourmet WGBL100S Power Cord Replacement: 8 단계, 이미지 2/3 Wolf Gourmet WGBL100S Power Cord Replacement: 8 단계, 이미지 3/3

    • Strip about an inch of insulation off of the snipped power cord and your replacement cord.

    • Twist each strand of wires together to keep them neat.

    번역하기

  10. Wolf Gourmet WGBL100S Power Cord Replacement: 9 단계, 이미지 1/2 Wolf Gourmet WGBL100S Power Cord Replacement: 9 단계, 이미지 2/2

    • Twist together the wires from the replacement cord to the wires still attached to the blender.

    • Solder the connection if possible.

    번역하기

  11. Wolf Gourmet WGBL100S Power Cord Replacement: 10 단계, 이미지 1/2 Wolf Gourmet WGBL100S Power Cord Replacement: 10 단계, 이미지 2/2

    • Wrap all the connections in electrical tape or heat shrink tubing.

    번역하기
결론

To reassemble your device, follow steps 1-5 in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Cole Gillespie

회원 가입일: 04/19/18

476 평판

안내서 2개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team S25-G16, Maness Spring 2018 Cal Poly, Team S25-G16, Maness Spring 2018 회원

CPSU-MANESS-S18S25G16

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 5

전체 시간: 233