기기를 수리하세요 커뮤니티 상점

Wolf Gourmet WGTR102S Lighting Component Replacement

소개

If the buttons on your toaster don't light up, try replacing the lighting component with this guide.

필요한 것

  1. Wolf Gourmet WGTR102S Lighting Component Replacement, Outer Shell: 1 단계, 이미지 1/1

    • Using a wedge, pry off the rubber pieces on the bottom of each foot of the toaster.

    번역하기

  2. Wolf Gourmet WGTR102S Lighting Component Replacement: 2 단계, 이미지 1/1

    • Remove the eight 8mm screws on each toaster foot using a Tri-point Y1 screwdriver.

    번역하기

  3. Wolf Gourmet WGTR102S Lighting Component Replacement: 3 단계, 이미지 1/1

    • Remove the crumb collector located on the bottom of the toaster.

    번역하기

  4. Wolf Gourmet WGTR102S Lighting Component Replacement: 4 단계, 이미지 1/1

    • Remove the three 8mm screws using the Tri-point Y1 screwdriver.

    번역하기

  6. Wolf Gourmet WGTR102S Lighting Component Replacement: 5 단계, 이미지 1/1

    • Remove the two 8mm screws on the bottom of the slide lever using a Tri-point Y1 screwdriver.

    • Once the screws are removed, detach the black plastic cover on the bottom of the slide lever.

    번역하기

  7. Wolf Gourmet WGTR102S Lighting Component Replacement: 6 단계, 이미지 1/1

    • Remove the final 8mm screw in the slide lever.

    • The lever can now pull away from the entire unit.

    번역하기

  8. Wolf Gourmet WGTR102S Lighting Component Replacement: 7 단계, 이미지 1/1

    • Remove toaster's outer shell by lifting straight up.

    • Slowly remove the outer shell. Disconnect ground wire before fully separating the shell and inner components.

    번역하기

  9. Wolf Gourmet WGTR102S Lighting Component Replacement: 8 단계, 이미지 1/2 Wolf Gourmet WGTR102S Lighting Component Replacement: 8 단계, 이미지 2/2

    • Disconnect the wire cluster that connects the lights and circuit board by pulling apart the two plastic connectors.

    • Remove the outer shell from the device.

    번역하기

  10. Wolf Gourmet WGTR102S Lighting Component Replacement, Lighting Component: 9 단계, 이미지 1/1

    • Remove two 8mm screws securing the lighting component using a Tri-point Y1 screwdriver.

    번역하기

  11. Wolf Gourmet WGTR102S Lighting Component Replacement: 10 단계, 이미지 1/1

    • Remove the lighting component from the device.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Ryan Funchess

회원 가입일: 04/19/18

697 평판

안내서 5개 작성하였습니다

배지: 8

배지 +5개 더

팀

Cal Poly, Team S22-G5, Maness Spring 2018 Cal Poly, Team S22-G5, Maness Spring 2018 회원

CPSU-MANESS-S18S22G5

4 회원들

안내서 5개 작성하였습니다

댓글 한 개

Hi, do you have an idea how to remove the beeping sound? It's annoying, I want to remove it

Thank you

francis - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 4

30일 전: 5

전체 시간: 236