주요 콘텐츠로 건너뛰기

Wolf Gourmet WGTR102S Slide Assist Plunger Replacement

필요한 것

  1. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement, Outer Shell: 1 단계, 이미지 1/1
    • Using a wedge, pry off the rubber pieces on the bottom of each foot of the toaster.

  2. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 2 단계, 이미지 1/1
    • Remove the eight 8mm screws on each toaster foot using a Tri-point Y1 screwdriver.

  3. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 3 단계, 이미지 1/1
    • Remove the crumb collector located on the bottom of the toaster.

  4. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 4 단계, 이미지 1/1
    • Remove the three 8mm screws using the Tri-point Y1 screwdriver.

  5. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 5 단계, 이미지 1/1
    • Remove the two 8mm screws on the bottom of the slide lever using a Tri-point Y1 screwdriver.

    • Once the screws are removed, detach the black plastic cover on the bottom of the slide lever.

  6. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 6 단계, 이미지 1/1
    • Remove the final 8mm screw in the slide lever.

    • The lever can now pull away from the entire unit.

  7. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 7 단계, 이미지 1/1
    • Remove toaster's outer shell by lifting straight up.

    • Slowly remove the outer shell. Disconnect ground wire before fully separating the shell and inner components.

  8. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 8 단계, 이미지 1/2 Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 8 단계, 이미지 2/2
    • Disconnect the wire cluster that connects the lights and circuit board by pulling apart the two plastic connectors.

    • Remove the outer shell from the device.

  9. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement, Slide Assist Plunger: 9 단계, 이미지 1/1
    • Remove the top panel by bending the tabs on each side straight up.

  10. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 10 단계, 이미지 1/1
    • Remove the two 8mm screws on the bottom of the plunger using a Tri-point Y1 screwdriver.

  11. Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 11 단계, 이미지 1/2 Wolf Gourmet WGTR102S Slide Assist Plunger Replacement: 11 단계, 이미지 2/2
    • Remove the plunger from the device.

결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

Ryan Funchess

회원 가입일: 04/19/18

697 평판

안내서 5개 작성하였습니다

Cal Poly, Team S22-G5, Maness Spring 2018 Cal Poly, Team S22-G5, Maness Spring 2018 회원

CPSU-MANESS-S18S22G5

4 회원들

안내서 5개 작성하였습니다

댓글 4개

Where does one get a new plunger for the replacement?

hsernaker - 답글

yes, where does one get a new pludger?

hiyar124 - 답글

Has anyone found a source for the WOLF toaster plunger?

Rick Guest - 답글

Any pointers on where to find Wolf replacement parts ?

Stefano Concina - 답글

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 6

30일 전: 15

전체 시간: 1,072