부품

부품은 필요하지 않습니다.

  1. Place CHiP on its back so that its stomach is facing you.
    • Place CHiP on its back so that its stomach is facing you.

  2. There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing. There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.
    • There are three small hex screws connecting the battery to CHiP. Remove all screws with a hex screwdriver and remove battery casing.

  3. Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver. Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.
    • Once the top face of the battery is off, you will see a small rectangular box that the batteries are inside. There are 4 Phillips head screws in the box. Remove all screws with a Phillips head screwdriver.

  4. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  5. Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector. Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector. Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.
    • Once the battery is removed from body, the battery should be connected by a red and black wire. There is a red rectangular connector that easily pulls apart. Pull apart the red rectangular connector.

  6. Remove the 4 Phillips screws shown. Remove the 4 Phillips screws shown.
    • Remove the 4 Phillips screws shown.

  7. Pull up top part of toy and remove the connecting wires. Unscrew the 2 Phillips head screws. CHiP should be viewed as seen in the third picture. Unscrew the 2 Phillips head screws. CHiP should be viewed as seen in the third picture.
    • Pull up top part of toy and remove the connecting wires.

    • Unscrew the 2 Phillips head screws. CHiP should be viewed as seen in the third picture.

  8. Remove the 4 Phillips screws to separate the head from the body. Remove the 4 Phillips screws to separate the head from the body. Remove the 4 Phillips screws to separate the head from the body.
    • Remove the 4 Phillips screws to separate the head from the body.

  9. Remove the 4 Phillips screws on back of the head, and pull off the casing for the back of the head. Remove the 4 Phillips screws on back of the head, and pull off the casing for the back of the head.
    • Remove the 4 Phillips screws on back of the head, and pull off the casing for the back of the head.

  10. Unscrew the screw on the ear with a Phillips screwdriver, and pull off the plastic connector. Remove the ear from head. Unscrew the screw on the ear with a Phillips screwdriver, and pull off the plastic connector. Remove the ear from head. Unscrew the screw on the ear with a Phillips screwdriver, and pull off the plastic connector. Remove the ear from head.
    • Unscrew the screw on the ear with a Phillips screwdriver, and pull off the plastic connector. Remove the ear from head.

결론

To reassemble your device, follow these instructions in reverse order.

Joseph Dantes

회원 가입일: 2018년 10월 02일

454 평판

안내서 4개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 1

지난 30일: 16

전체 시간: 134