주요 콘텐츠로 건너뛰기

기기를 수리하세요

수리할 권리

상점

부품

지정된 부품이 없습니다.

  1. Place the Smart Watch on its back or side so that the full watch band is visible. Place the Smart Watch on its back or side so that the full watch band is visible.
    • Place the Smart Watch on its back or side so that the full watch band is visible.

  2. Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.
    • Remove the wrist strap by gently pulling the band off of the plastic pegs on the back of the watch.

  3. Remove the four screws in the back of the watch using a Phillips #0 screwdriver.
    • Remove the four screws in the back of the watch using a Phillips #0 screwdriver.

  4. Gently pull off the back side of the watch component.
    • Gently pull off the back side of the watch component.

  5. Pull the battery and motherboard component out.
    • Pull the battery and motherboard component out.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Joseph Dantes

회원 가입일: 2018년 10월 02일

499 평판

안내서 4개 작성하였습니다

What batteries does the smart band use?

Yourmajesty100 - 답글

Can be replaced by one of these and some soldering.

https://www.adafruit.com/product/1317

Alto -

This doesn’t detail sourcing the replacement or un-soldering then soldering the battery.

This is just “WowWee CHiP Robot Dog Smart Watch Battery Inspection” Not Replacement.

Alto - 답글

But the discussion is under battery replacement

Daniel peters -

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 10

30일 전: 34

전체 시간: 2,194