주요 콘텐츠로 건너뛰기

소개

This guide is inspired by the existing guide on iFxit. This is an improvement of the original with a better procedure.

ATTENTION: Technically the Xbox Live ToS prohibit this, but the Xbox Live enforcement team typically doesn't care about the hard drive modification. You may be banned from Xbox Live. YOU HAVE BEEN WARNED!!!

WARNING: THIS WILL VOID YOUR WARRANTY if you have one.

If you have a low capacity hard drive and want to upgrade it or need the hard drive for a modern system, this guide will show you how to take the fat 360 hard drive apart to extract the hard drive. Taking this drive apart isn't a difficult task, but it requires access to Torx T6 and T10 screwdrivers.

Once the enclosure is open, any compatible drive can be installed. There may be compatibility limitations to deal with, so buy the correct drive or it may not work.

Guide notes

  • Try not to destroy the enclosure if you do not need it. These have residual value and can be sold to recoup some of your costs.
  • Any known compatible drive can be installed. Some drives do not work, so bear this in mind when purchasing a drive.

부품

지정된 부품이 없습니다.

  1. This will void any present warranty. All Microsoft warranties are expired. Depending on where your drive comes from, there may or may not be a warranty seal. Remove the 3 screws from the bottom of the drive. Use a T6 Torx driver.
    • This will void any present warranty. All Microsoft warranties are expired.

    • Depending on where your drive comes from, there may or may not be a warranty seal.

    • Remove the 3 screws from the bottom of the drive. Use a T6 Torx driver.

    • Remove the warranty seal (if present) and remove the final screw. Use a T6 Torx driver.

  2. If your drive is difficult to open, a screwdriver or plastic pry tool can be used to help open the enclosure.
    • If your drive is difficult to open, a screwdriver or plastic pry tool can be used to help open the enclosure.

  3. PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기

    PC 노트북 배터리

    큰 전력 향상을 위한 손쉬운 수리.

    지금 장보기
  4. If you are taking the enclosure apart for the bare drive, less caution is needed. After removing the 4 bottom screws, remove the bottom cover. The top of the drive will come off first. Note: Open the drive where the spring will not get lost. After removing the top of the drive, remove the drive from the enclosure. Unopened drives will have more adhesive strength.
    • If you are taking the enclosure apart for the bare drive, less caution is needed.

    • After removing the 4 bottom screws, remove the bottom cover. The top of the drive will come off first. Note: Open the drive where the spring will not get lost.

    • After removing the top of the drive, remove the drive from the enclosure. Unopened drives will have more adhesive strength.

  5. Remove the four T10 Torx screws holding the cover and hard drive. After removing the screws, slide the top cover off and disconnect the drive. Disconnect the hard drive and remove it from the enclosure.
    • Remove the four T10 Torx screws holding the cover and hard drive.

    • After removing the screws, slide the top cover off and disconnect the drive.

    • Disconnect the hard drive and remove it from the enclosure.

결승점

Nick

회원 가입일: 2009년 11월 10일

49,244 평판

안내서 39개 작성하였습니다

Master Techs Master Techs 회원

Community

287 회원들

안내서 811개 작성하였습니다

댓글 쓰기

조회 통계:

지난 24시간: 0

지난 7일: 8

지난 30일: 46

전체 시간: 395