Xbox Elite Wireless Controller Series 2 Top Housing Replacement

소개

Use this guide to replace the top housing on your Xbox Elite Wireless Controller Series 2.

The top housing may need to be replaced if it's cracked, or you may be installing a new, customized one. The top housing is sometimes called a faceplate or top shell.

필요한 것

1 단계 Remove the thumbstick toppers

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the thumbstick toppers: 1 단계, 이미지 1/3

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the thumbstick toppers: 1 단계, 이미지 2/3

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the thumbstick toppers: 1 단계, 이미지 3/3

Use your fingers to remove the thumbstick toppers.

편집

2 단계 Remove the D-pad cover

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the D-pad cover: 2 단계, 이미지 1/2

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the D-pad cover: 2 단계, 이미지 2/2

Use your fingers to remove the D-pad cover.

편집

3 단계 Disassembly information

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Disassembly information: 3 단계, 이미지 1/2

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Disassembly information: 3 단계, 이미지 2/2

The top housing is secured in two ways:
13 tight plastic clips
Several strips of adhesive tape

편집

4 단계 Release the top housing clips

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Release the top housing clips: 4 단계, 이미지 1/3

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Release the top housing clips: 4 단계, 이미지 2/3

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Release the top housing clips: 4 단계, 이미지 3/3

Releasing the plastic clips requires significant force. Take your time to avoid damaging your controller.
Insert an opening tool between the left bumper and the top housing.
Pry up the top housing to release the top left clip.

편집

5 단계

Insert an opening tool into the seam between the two housings on the controller’s left edge.

편집

6 단계

Xbox Elite Wireless Controller Series 2 Top Housing Replacement: 6 단계, 이미지 3/3

Slide the opening tool along the left edge and pry up intermittently to release the plastic clips.

편집

7 단계

Xbox Elite Wireless Controller Series 2 Top Housing Replacement: 7 단계, 이미지 3/3

Insert your opening tool into the seam between the two housings on the inner left edge.
Slide the opening tool along the bottom edge and pry up intermittently to release the plastic clips.

편집

8 단계

Xbox Elite Wireless Controller Series 2 Top Housing Replacement: 8 단계, 이미지 3/3

Insert your opening tool into the seam between the two housings on the controller’s right edge.
Slide the opening tool along the right edge and pry up intermittently to release the plastic clips.

편집

9 단계

Insert your opening tool between the right bumper and the top housing.
Pry up the top housing to release the remaining plastic clips.

편집

10 단계 Remove the top housing

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the top housing: 10 단계, 이미지 1/3

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the top housing: 10 단계, 이미지 2/3

Xbox Elite Wireless Controller Series 2 Top Housing Replacement, Remove the top housing: 10 단계, 이미지 3/3

Remove the top housing.
To reinstall the top housing, position it on the midframe assembly and press down firmly along the edges to engage all of the clips.

편집