주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Xbox One Elite Controller (Model 1698) Daughterboard Replacement

필요한 것

  1. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: 1 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Show me the Screws!: 1 단계, 이미지 2/2
    • You can remove the side panels with a pry tool.

    • You don't need to remove the rubber. The rubber on this controller was already bad

  2. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Removing the back panel screws: 2 단계, 이미지 1/1
    • Remove the 5 Torx Security Bit (TR9) screws

  3. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: 3 단계, 이미지 1/3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: 3 단계, 이미지 2/3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Popping that back panel off: 3 단계, 이미지 3/3
    • Pry the panel next to the 3.5mm port

    • Be careful to not rip the ribbon shown in the next step

  4. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: 4 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Warning Carefully remove the ribbon: 4 단계, 이미지 2/2
    • Be careful to not rip the ribbon cable

    • You can pop the connector up to remove the ribbon easily

    • Ribbon Cable

  5. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Screws on controller motherboard: 5 단계, 이미지 1/1
    • Remove the 2 Torx (T6) screws

  6. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: 6 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Desolder wires from motherboard: 6 단계, 이미지 2/2
    • Desolder the 4 wires on each side, these control the vibrations and the RT LT

  7. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: 7 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the motherboard: 7 단계, 이미지 2/2
    • Pull up from the "top" side of the controller on the sister board.

  8. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: 8 단계, 이미지 1/3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: 8 단계, 이미지 2/3 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the Home Button Cover: 8 단계, 이미지 3/3
    • Be Careful to not lose the sync button

    • Pry the middle section up from the home button side.

    • This will also remove the LB and RB which is a single part

  9. Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: 9 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Daughterboard Replacement, Remove the controller daughterboard: 9 단계, 이미지 2/2
    • Unscrew the 6 Torx (T6) screws

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

EasyAsABC123

회원 가입일: 01/22/10

2,407 평판

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 19

30일 전: 57

전체 시간: 8,191