기기를 수리하세요 커뮤니티 상점

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Xbox One Elite Controller (Model 1698) Motherboard Replacement

필요한 것

  1. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Show me the Screws!: 1 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Show me the Screws!: 1 단계, 이미지 2/2

    • You can remove the side panels with a pry tool.

    • You don't need to remove the rubber. The rubber on this controller was already bad

    번역하기

  2. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Removing the back panel screws: 2 단계, 이미지 1/1

    • Remove the 5 Torx Security Bit (TR9) screws

    번역하기

  3. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: 3 단계, 이미지 1/3 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: 3 단계, 이미지 2/3 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Popping that back panel off: 3 단계, 이미지 3/3

    • Pry the panel next to the 3.5mm port

    • Be careful to not rip the ribbon shown in the next step

    번역하기

  5. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Warning Carefully remove the ribbon: 4 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Warning Carefully remove the ribbon: 4 단계, 이미지 2/2

    • Be careful to not rip the ribbon cable

    • You can pop the connector up to remove the ribbon easily

    • Ribbon Cable

    번역하기

  6. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Screws on controller motherboard: 5 단계, 이미지 1/1

    • Remove the 2 Torx (T6) screws

    번역하기

  7. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Desolder wires from motherboard: 6 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Desolder wires from motherboard: 6 단계, 이미지 2/2

    • Desolder the 4 wires on each side, these control the vibrations and the RT LT

    번역하기

  8. Xbox One Elite Controller (Model 1698) Motherboard Replacement, Remove the motherboard: 7 단계, 이미지 1/2 Xbox One Elite Controller (Model 1698) Motherboard Replacement, Remove the motherboard: 7 단계, 이미지 2/2

    • Pull up from the "top" side of the controller on the sister board.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 9명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

EasyAsABC123

회원 가입일: 01/22/10

2,407 평판

안내서 5개 작성하였습니다

배지: 25

배지 +22개 더

댓글 한 개

50 minutes? half of that tops

glenn.fowell - 답글

댓글 쓰기

조회 통계:

24 시간 전: 5

7일 전: 33

30일 전: 91

전체 시간: 16,518