기기를 수리하세요 커뮤니티 상점

Xelio P900A-BK Screen Replacement

소개

Teaching you how to replace a crack screen.

필요한 것

  1. Xelio P900A-BK Screen Replacement, Screen: 1 단계, 이미지 1/1

    • Remove the two bottom screws.

    • The two bottom screws have a 2.44mm wide tops and are 5.44mm.

    번역하기

  2. Xelio P900A-BK Screen Replacement: 2 단계, 이미지 1/2 Xelio P900A-BK Screen Replacement: 2 단계, 이미지 2/2

    • Slide the spludger between the screen's rolled edge and the back of the tablet and pry apart carefully. Expect the tablet screen to make a cracking sound.

    • Slide the spudger in the slit all the way around the perimeter of the tablet to fully separate the screen.

    번역하기

  3. Xelio P900A-BK Screen Replacement: 3 단계, 이미지 1/1

    • Once the screen has fully separated from the back of the tablet, gently lift up the edges to remove the screen.

    번역하기

  4. Xelio P900A-BK Screen Replacement: 4 단계, 이미지 1/2 Xelio P900A-BK Screen Replacement: 4 단계, 이미지 2/2

    • Next, disconnect the front facing camera ribbon (shown). The ribbon is held to the motherboard by a small bar.

    • Using the spudger to pry open the bar, pull the ribbon out to disconnect it.

    번역하기

  6. Xelio P900A-BK Screen Replacement: 5 단계, 이미지 1/2 Xelio P900A-BK Screen Replacement: 5 단계, 이미지 2/2

    • Next, work on disconnecting the ribbon for the touch screen.

    • The touch screen ribbon is larger than the camera ribbon and is located on the left side of motherboard.

    • Using the spudger, gently pry the ribbon out from under the bar. Pull the ribbon and disconnect it from the motherboard.

    번역하기

  7. Xelio P900A-BK Screen Replacement: 6 단계, 이미지 1/3 Xelio P900A-BK Screen Replacement: 6 단계, 이미지 2/3 Xelio P900A-BK Screen Replacement: 6 단계, 이미지 3/3

    • Next, work to disconnect the LCD screen ribbon.

    • This ribbon is located on the right side of the motherboard.

    • The ribbon is connected to the motherboard by a small bar. Using the spudger, pry the bar apart and slide the ribbon out.

    번역하기

  8. Xelio P900A-BK Screen Replacement: 7 단계, 이미지 1/3 Xelio P900A-BK Screen Replacement: 7 단계, 이미지 2/3 Xelio P900A-BK Screen Replacement: 7 단계, 이미지 3/3

    • Remove the two motherboard screws.

    • To remove the first screw, expose the black strip. Then using a Philips head screwdriver, remove the first screw.

    • Locate the second screw by looking to the bottom right of the motherboard. Remove the second screw with the Philips head screwdriver.

    번역하기

  9. Xelio P900A-BK Screen Replacement: 8 단계, 이미지 1/2 Xelio P900A-BK Screen Replacement: 8 단계, 이미지 2/2

    • Locate the last connection to the LCD in the top right section of the tablet.

    • The last connection is a ribbon connected to green wire, which is held down by tape.

    • Disconnect the ribbon by removing the tape connecting it to the plastic frame of the tablet.

    번역하기

  10. Xelio P900A-BK Screen Replacement: 9 단계, 이미지 1/1

    • With the spudger, pry the LCD screen from the plastic screen holder.

    • Use gentle, but firm force to pry the LCD away from the holder.

    번역하기

  11. Xelio P900A-BK Screen Replacement: 10 단계, 이미지 1/1

    • Work the spudger all the way around until the LCD is free from the screen holder.

    번역하기

  12. Xelio P900A-BK Screen Replacement: 11 단계, 이미지 1/1

    • Finally, lift the LCD off, removing it from the screen holder and the motherboard.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 3명과 함께

Marcus Nelson

회원 가입일: 03/26/15

307 평판

안내서 3개 작성하였습니다

배지: 9

배지 +6개 더

팀

UMass Dartmouth, Team 7-6, Cichon Spring 2015 UMass Dartmouth, Team 7-6, Cichon Spring 2015 회원

UMASSD-CICHON-S15S7G6

3 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 1

30일 전: 1

전체 시간: 372