기기를 수리하세요 커뮤니티 상점

Xiaomi Redmi 2 Ambient Light Sensor Replacement

소개

Use this guide to remove the ambient light sensor in your Xiaomi Redmi 2 for repair or replacement.

필요한 것

  1. Xiaomi Redmi 2 Ambient Light Sensor Replacement, Motherboard: 1 단계, 이미지 1/2 Xiaomi Redmi 2 Ambient Light Sensor Replacement, Motherboard: 1 단계, 이미지 2/2

    • Use the flat end of the spudger to remove the back panel from the mid-frame and front body.

    번역하기

  2. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 2 단계, 이미지 1/1

    • Insert your finger into the curved opening of the mid-frame.

    • Lift the battery and remove.

    번역하기

  3. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 3 단계, 이미지 1/1

    • Remove the SIM and/or memory cards if present.

    • Remove twelve 3.4 mm Phillips #000 screws securing the mid-frame to the front body.

    번역하기

  4. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 4 단계, 이미지 1/1

    • Slide the spudger between the mid-frame and front body, gradually prying the two bodies apart as you slide the spudger around the perimeter of the phone.

    번역하기

  5. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 5 단계, 이미지 1/1

    • Remove the 3.4 mm Phillips #000 screw that holds the motherboard to the front body.

    • Keep this screw separate from the initial twelve.

    번역하기

  7. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 6 단계, 이미지 1/2 Xiaomi Redmi 2 Ambient Light Sensor Replacement: 6 단계, 이미지 2/2

    • Using one prong of the tweezers, pry back the brown clip located on top of the LCD ribbon connector.

    번역하기

  8. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 7 단계, 이미지 1/2 Xiaomi Redmi 2 Ambient Light Sensor Replacement: 7 단계, 이미지 2/2

    • Using one prong of the tweezers, pry the ribbon clip away from the motherboard.

    번역하기

  9. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 8 단계, 이미지 1/2 Xiaomi Redmi 2 Ambient Light Sensor Replacement: 8 단계, 이미지 2/2

    • Lift and hinge the motherboard with your fingers.

    번역하기

  10. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 9 단계, 이미지 1/2 Xiaomi Redmi 2 Ambient Light Sensor Replacement: 9 단계, 이미지 2/2

    • Using one prong of the tweezers, lift and pry back the metal clip positioned over the front proximity sensor ribbon connector.

    번역하기

  11. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 10 단계, 이미지 1/2 Xiaomi Redmi 2 Ambient Light Sensor Replacement: 10 단계, 이미지 2/2

    • Using the tweezers, pull the antenna connector from the motherboard.

    번역하기

  12. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 11 단계, 이미지 1/1

    • Lift the motherboard out of the front cover and set aside.

    번역하기

  13. Xiaomi Redmi 2 Ambient Light Sensor Replacement, Ambient Light Sensor: 12 단계, 이미지 1/1

    • Using one prong of the tweezers, lift and loosen the edge of the ambient light sensor from the motherboard.

    번역하기

  14. Xiaomi Redmi 2 Ambient Light Sensor Replacement: 13 단계, 이미지 1/1

    • Using your fingers, gently pull out the ambient light sensor.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 17명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Alicia Brenner

회원 가입일: 10/01/15

3,539 평판

안내서 5개 작성하였습니다

배지: 14

배지 +11개 더

팀

USF Tampa, Team 1-3, Leahy Fall 2015 USF Tampa, Team 1-3, Leahy Fall 2015 회원

USFT-LEAHY-F15S1G3

2 회원들

안내서 5개 작성하였습니다

댓글 한 개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 4

30일 전: 6

전체 시간: 5,241