기기를 수리하세요 커뮤니티 상점

XtremeMac Luna Dissasembly

소개

This guide will show you how to open the XtremeMac Luna so that its inner components are easily accessible.

필요한 것

  1. XtremeMac Luna Dissasembly, Bottom Panel: 1 단계, 이미지 1/3 XtremeMac Luna Dissasembly, Bottom Panel: 1 단계, 이미지 2/3 XtremeMac Luna Dissasembly, Bottom Panel: 1 단계, 이미지 3/3

    • Flip the device over so that the batteries are closest to you.

    • Remove the battery lid by pressing the battery cover's tab and pulling it away from the device.

    • Push the battery against the spring and lift it out of the casing.

    • Repeat with the other battery.

    편집

  3. XtremeMac Luna Dissasembly: 2 단계, 이미지 1/1

    • Unscrew all eight 12mm Phillips head screws with a Philips #1 screwdriver.

    • The iFixit 26 bit screwdriver kit will not reach the screws. Make sure to use a screwdriver that is thin enough to not get stuck in the screw holes.

    편집

  4. XtremeMac Luna Dissasembly: 3 단계, 이미지 1/2 XtremeMac Luna Dissasembly: 3 단계, 이미지 2/2

    • Flip the Luna back over so that the buttons are facing upward and the LCD screen is facing you.

    • Gently tilt the lid back 45 degrees so that the inside is exposed.

    • Be mindful of the wires inside of the Luna. It is easy to break a connection if a wire gets caught.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 5명과 함께

Daniel Johnson

회원 가입일: 04/14/13

1 평판

안내서 1개 작성함

배지: 3

팀

Cal Poly, Team 3-47, Amido Spring 2013 Cal Poly, Team 3-47, Amido Spring 2013 회원

CPSU-AMIDO-S13S3G47

4 회원들

안내서 8개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 410