기기를 수리하세요 커뮤니티 상점

Yamaha NS‑AW190BL Damaged Wires Replacement

소개

This guide explains the method to repair or replace damaged wires on the Yamaha NS‑AW190BL.

필요한 것

  1. Yamaha NS‑AW190BL Damaged Wires Replacement, Rear Casing: 1 단계, 이미지 1/2 Yamaha NS‑AW190BL Damaged Wires Replacement, Rear Casing: 1 단계, 이미지 2/2

    • Remove the six Phillips Head 1.2mm screws on the front side of the speaker.

    번역하기

  2. Yamaha NS‑AW190BL Damaged Wires Replacement: 2 단계, 이미지 1/3 Yamaha NS‑AW190BL Damaged Wires Replacement: 2 단계, 이미지 2/3 Yamaha NS‑AW190BL Damaged Wires Replacement: 2 단계, 이미지 3/3

    • Crack open both parts of the casing carefully.

    • Using a plastic opening tool, wedge open the bottom of the speaker to separate the two parts of the speaker.

    번역하기

  3. Yamaha NS‑AW190BL Damaged Wires Replacement: 3 단계, 이미지 1/3 Yamaha NS‑AW190BL Damaged Wires Replacement: 3 단계, 이미지 2/3 Yamaha NS‑AW190BL Damaged Wires Replacement: 3 단계, 이미지 3/3

    • Remove the cooling foam.

    • Use a metal spudger to push the tab in on the red wire.

    • Repeat the process for the blue wire.

    번역하기

  5. Yamaha NS‑AW190BL Damaged Wires Replacement: 4 단계, 이미지 1/2 Yamaha NS‑AW190BL Damaged Wires Replacement: 4 단계, 이미지 2/2

    • The blue wire can now be removed from its connector.

    • Remove the red wire to free the rear casing.

    번역하기

  6. Yamaha NS‑AW190BL Damaged Wires Replacement, Wiring: 5 단계, 이미지 1/2 Yamaha NS‑AW190BL Damaged Wires Replacement, Wiring: 5 단계, 이미지 2/2

    • Use the metal spudger to bend down the metal tabs that hold the wires to the terminals. The tabs are small and in between the grooves of the terminal.

    번역하기

  7. Yamaha NS‑AW190BL Damaged Wires Replacement: 6 단계, 이미지 1/2 Yamaha NS‑AW190BL Damaged Wires Replacement: 6 단계, 이미지 2/2

    • Remove the wires from the terminals.

    번역하기

  8. Yamaha NS‑AW190BL Damaged Wires Replacement: 7 단계, 이미지 1/2 Yamaha NS‑AW190BL Damaged Wires Replacement: 7 단계, 이미지 2/2

    • Use the metal spudger to bend the metal tabs that hold the connectors to the terminals.

    번역하기

  9. Yamaha NS‑AW190BL Damaged Wires Replacement: 8 단계, 이미지 1/3 Yamaha NS‑AW190BL Damaged Wires Replacement: 8 단계, 이미지 2/3 Yamaha NS‑AW190BL Damaged Wires Replacement: 8 단계, 이미지 3/3

    • Remove the wires from the terminals. Then remove the entire wire assembly.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 3명과 함께

Roshal Robince

회원 가입일: 02/07/17

101 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

USF Tampa, Team 17-3, Blackwell Spring 2017 USF Tampa, Team 17-3, Blackwell Spring 2017 회원

USFT-BLACKWELL-S17S17G3

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 5

30일 전: 8

전체 시간: 738