소개

Learn to remove and replace a broken key for your keyboard with this guide. The process is fairly simple and mostly requires the removal of screws.

부품

부품은 필요하지 않습니다.

Turn the keyboard over so that the keys are facing the ground.
  • Turn the keyboard over so that the keys are facing the ground.

댓글 쓰기

Pop the tabs on the battery casing and remove it from the back plate.
  • Pop the tabs on the battery casing and remove it from the back plate.

댓글 쓰기

Locate the six batteries and remove them from the battery cavity.
  • Locate the six batteries and remove them from the battery cavity.

what type of batteries? and how much ?

thanks godbless

colladonelson - 답글

Remove the six 10mm screws at the top of the backplate.
  • Remove the six 10mm screws at the top of the backplate.

댓글 쓰기

Remove the seven 12mm screws in the middle of the back plate.
  • Remove the seven 12mm screws in the middle of the back plate.

댓글 쓰기

Remove the eight 10mm screws from the side and the bottom of the back plate.
  • Remove the eight 10mm screws from the side and the bottom of the back plate.

댓글 쓰기

As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.
  • As the face plate is no longer connected to the body of the keyboard, be careful to not drop the body when performing this step.

  • Flip over the keyboard

댓글 쓰기

Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard. Be careful when removing the face plate. There are wires attached.
  • Lifting from the front and the back of the face plate equally, pull the face plate up and then back, away from the keyboard.

    • Be careful when removing the face plate. There are wires attached.

댓글 쓰기

Remove the  32mm screws that hold keys down.
  • Remove the 32mm screws that hold keys down.

  • Depending on which block of keys you wish to remove, there may be four screws instead of three.

댓글 쓰기

Remove the block of keys that holds the key you wish to install.
  • Remove the block of keys that holds the key you wish to install.

    • To do this, apply a small force away from the top of the keys and slightly toward the floor.

    • If done correctly, the block of keys will come to a slight downward angle.

댓글 쓰기

Press the tab on the back side of the block of keys out and detach the black keys. Press the tab on the back side of the block of keys out and detach the black keys.
  • Press the tab on the back side of the block of keys out and detach the black keys.

댓글 쓰기

Remove the individual white key(s) or the black key set(s) that require replacement.
  • Remove the individual white key(s) or the black key set(s) that require replacement.

댓글 쓰기

결론

To reassemble your device, follow these instructions in reverse order.

다른 3명이 해당 안내서를 완성하였습니다.

Kevin Green

회원 가입일: 2012년 09월 18일

231 평판

안내서 2개 작성하였습니다

Cal Poly, Team 2-62, Propen Fall 2012 Cal Poly, Team 2-62, Propen Fall 2012 회원

CPSU-PROPEN-F12S2G62

2 회원들

안내서 6개 작성하였습니다

Excellent, Although I've got a different type of yamaha keyboard, still good inside info.

Diederick Fokker - 답글

댓글 쓰기

조회 통계:

지난 24시간: 4

지난 7일: 38

지난 30일: 124

전체 시간: 16,566