기기를 수리하세요 커뮤니티 상점

Yujin Robot iCLEBO Arte Filter Replacement

소개

This guide will teach you how to replace the filter.

  1. Yujin Robot iCLEBO Arte Filter Replacement, Dust Bin: 1 단계, 이미지 1/1

    • Remove the dust bin by gently pressing the silver button on top of the vacuum until the bin releases.

    편집

  2. Yujin Robot iCLEBO Arte Filter Replacement: 2 단계, 이미지 1/2 Yujin Robot iCLEBO Arte Filter Replacement: 2 단계, 이미지 2/2

    • Grip the bottom of the dust bin. Push up on the tabs as indicated by the yellow arrows.

    • Empty contents of bin into waste receptacle and rinse with water as needed.

    편집

  4. Yujin Robot iCLEBO Arte Filter Replacement, Filter: 3 단계, 이미지 1/1

    • Push the yellow tab releasing the filter harness.

    편집

  5. Yujin Robot iCLEBO Arte Filter Replacement: 4 단계, 이미지 1/1

    • Replace or clean filter under a stream of water. When reinserting filter, make sure the filter's cut corner is in the correct corner.

    편집
결론

To finish reassembling your device, follow these instructions in reverse order.

작성자

다른 기여자 4명과 함께

Nathan Clark

회원 가입일: 02/28/17

101 평판

안내서 1개 작성함

배지: 3

팀

USF Tampa, Team S2-G3, Nance Spring 2017 USF Tampa, Team S2-G3, Nance Spring 2017 회원

USFT-NANCE-S17S2G3

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 302