기기를 수리하세요 커뮤니티 상점

Yuneec Typhoon H Gimbal Bushing Reattachment

소개

This guide will demonstrate how to put the camera apparatus back together on a Yuneec Typhoon H, if it has come apart.

필요한 것

  1. Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: 1 단계, 이미지 1/2 Yuneec Typhoon H Gimbal Bushing Reattachment, Gimbal Bushing Connectors to Camera Mount: 1 단계, 이미지 2/2

    • In order to repair the camera and camera gimbal, remove the camera configuration from the body of the drone.

    • Pull up on the tab connected to the camera configuration and slide the entire apparatus off.

    번역하기

  3. Yuneec Typhoon H Gimbal Bushing Reattachment: 2 단계, 이미지 1/3 Yuneec Typhoon H Gimbal Bushing Reattachment: 2 단계, 이미지 2/3 Yuneec Typhoon H Gimbal Bushing Reattachment: 2 단계, 이미지 3/3

    • Put the gimbal bushings (the rubber balls) back into the plastic alignment mounts.

    • The circle that is separated from the main body of the bushing should then be inserted into the hole.

    • When pushing these bushings back into place, it is smart to use a skinny tool or toothpick.

    번역하기
결론

To reassemble your device, simply slide the camera mount back onto the bottom of the drone.

다른 2명이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 6명과 함께

Jake Breul

회원 가입일: 04/16/18

127 평판

안내서 1개 작성함

배지: 5

배지 +2개 더

팀

Cal Poly, Team S22-G3, Maness Spring 2018 Cal Poly, Team S22-G3, Maness Spring 2018 회원

CPSU-MANESS-S18S22G3

4 회원들

안내서 5개 작성하였습니다

댓글 3개

Camera not getting power after crash.

Don - 답글

Crashed drone and camera not getting power anymore. Nothing appears to be broken.

Don - 답글

Did steps. Bushings ok. Camera still won't communicate.

vickiesamus - 답글

댓글 쓰기

조회 통계:

24 시간 전: 2

7일 전: 5

30일 전: 10

전체 시간: 1,610