기기를 수리하세요 커뮤니티 상점

Yuneec Typhoon H LED Board Replacement

소개

This guide instructs you to replace the LED lights on your Yuneec Typhoon H drone. The LED lights are important for tracking where your drone is, when flying within line of sight and for other pilots to know where your drone is in the sky.

필요한 것

  1. Yuneec Typhoon H LED Board Replacement, LED Board: 1 단계, 이미지 1/1

    • This guide begins with the propeller already removed.

    번역하기

  2. Yuneec Typhoon H LED Board Replacement: 2 단계, 이미지 1/2 Yuneec Typhoon H LED Board Replacement: 2 단계, 이미지 2/2

    • Turn the drone upside down to have easy access to the prop arm.

    • Twist out the prop motor clockwise.

    번역하기

  4. Yuneec Typhoon H LED Board Replacement: 3 단계, 이미지 1/1

    • Unscrew two 4.9mm screws on the board using a Phillips #000 screwdriver.

    번역하기

  5. Yuneec Typhoon H LED Board Replacement: 4 단계, 이미지 1/2 Yuneec Typhoon H LED Board Replacement: 4 단계, 이미지 2/2

    • Hold the LED board in one hand and pinch the plug at the connection to the board with the other hand.

    • Pull the plug out from the connection piece.

    번역하기
결론

To reassemble your device, follow these instructions in reverse order.

다른 한 분이 해당 안내서를 완성하였습니다.

작성자

다른 기여자 1명과 함께

Claire Luce

회원 가입일: 04/16/18

371 평판

안내서 2개 작성하였습니다

배지: 9

배지 +6개 더

팀

Cal Poly, Team S22-G3, Maness Spring 2018 Cal Poly, Team S22-G3, Maness Spring 2018 회원

CPSU-MANESS-S18S22G3

4 회원들

안내서 5개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 2

30일 전: 2

전체 시간: 470