ZTE Blade Spark Battery Replacement - iFixit 수리 안내서

소개

This guide goes through how to safely disassemble the ZTE Blade Spark and replace the battery. This device contains electrical components, and the repair should be preformed in a dry environment. Replacing your battery is easy and a great way to give your device a fresh start.

필요한 것

1 단계 Battery

ZTE Blade Spark Battery Replacement, Battery: 1 단계, 이미지 1/1

Apply heat evenly on the back cover using the iOpener to soften the adhesive.

2 단계

ZTE Blade Spark Battery Replacement: 2 단계, 이미지 1/2

ZTE Blade Spark Battery Replacement: 2 단계, 이미지 2/2

Carefully remove the back cover using an opening tool.

3 단계

ZTE Blade Spark Battery Replacement: 3 단계, 이미지 1/1

Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.
Gently remove the SIM card tray.

4 단계

ZTE Blade Spark Battery Replacement: 4 단계, 이미지 1/1

To remove the inner white panel/cover, use a plastic opening tool to loosen from each side.

5 단계

ZTE Blade Spark Battery Replacement: 5 단계, 이미지 1/1

Set the inner white panel to the side.

6 단계

ZTE Blade Spark Battery Replacement: 6 단계, 이미지 1/1

After removing the inner white panel you should see a black panel. Use a Phillips #00 screwdriver to remove the six 4.0 mm screws.

7 단계

ZTE Blade Spark Battery Replacement: 7 단계, 이미지 1/1

Remove the black panel, revealing the battery.

8 단계

ZTE Blade Spark Battery Replacement: 8 단계, 이미지 1/1

Disconnect the tab connecting the battery to the circuit.

9 단계

ZTE Blade Spark Battery Replacement: 9 단계, 이미지 1/1

Remove the battery from the device.

10 단계

ZTE Blade Spark Battery Replacement: 10 단계, 이미지 1/1

Place battery off to the side and retrieve new battery.

결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Andrew Bliss

회원 가입일: 03/27/23

181 평판

안내서 1개 작성함

팀

IUPUI, Team 1-3, Harley Spring 2023 IUPUI, Team 1-3, Harley Spring 2023 회원

IUPUI-HARLEY-S23S1G3

3 회원들

안내서 3개 작성하였습니다

댓글 0개

조회 통계:

24 시간 전: 2

7일 전: 2

30일 전: 6

전체 시간: 121