기기를 수리하세요 커뮤니티 상점

ZTE Blade Spark Finger Sensor Assembly Replacement

소개

This guide will go through how to disassemble the phone and replace the finger sensor assembly safely. This item has electrical components and should be performed in a dry environment.

필요한 것

  1. ZTE Blade Spark Finger Sensor Assembly Replacement, Finger Sensor Assembly: 1 단계, 이미지 1/1

    • Carefully open the back cover.

    편집

  2. ZTE Blade Spark Finger Sensor Assembly Replacement: 2 단계, 이미지 1/2 ZTE Blade Spark Finger Sensor Assembly Replacement: 2 단계, 이미지 2/2

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    편집

  4. ZTE Blade Spark Finger Sensor Assembly Replacement: 3 단계, 이미지 1/1

    • Slowly remove the back portion of the phone without pulling the attached cable.

    편집

  5. ZTE Blade Spark Finger Sensor Assembly Replacement: 4 단계, 이미지 1/2 ZTE Blade Spark Finger Sensor Assembly Replacement: 4 단계, 이미지 2/2

    • Release the attached cable and slowly remove the finger sensor from the phone entirely.

    편집

  6. ZTE Blade Spark Finger Sensor Assembly Replacement: 5 단계, 이미지 1/1

    • Attach the cable of the new sensor to the motherboard of the phone.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Nathaniel Loewito Elijanto

회원 가입일: 03/27/23

121 평판

안내서 1개 작성함

배지: 2

팀

IUPUI, Team 1-3, Harley Spring 2023 IUPUI, Team 1-3, Harley Spring 2023 회원

IUPUI-HARLEY-S23S1G3

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 67