기기를 수리하세요 커뮤니티 상점

ZTE Blade Spark Screen Replacement

소개

A step-by-step guide on how to replace the screen on a ZTE Blade Spark smartphone.

This guide is useful if the screen is cracked, has dead pixels, or is not displaying anything.

Please use caution and the necessary PPE if working with cracked screen glass.

필요한 것

  1. ZTE Blade Spark Screen Replacement, Screen: 1 단계, 이미지 1/1

    • Place phone screen side down on a flat surface.

    편집

  2. ZTE Blade Spark Screen Replacement: 2 단계, 이미지 1/2 ZTE Blade Spark Screen Replacement: 2 단계, 이미지 2/2

    • Take an opening tool, and insert it between the phone's backplate and chassis.

    • Work the tool all the way around perimeter of the phone until the backplate is free.

    편집

  3. ZTE Blade Spark Screen Replacement: 3 단계, 이미지 1/1

    • Use a Phillips #00 screwdriver to carefully remove all fifteen 3.0 mm screws.

    편집

  4. ZTE Blade Spark Screen Replacement: 4 단계, 이미지 1/1

    • Remove the middle plate that was unscrewed from the previous step.

    • At this stage you should have 3 separate parts as shown.

    • For the next step you will be working on the middle part in this picture.

    편집

  6. ZTE Blade Spark Screen Replacement: 5 단계, 이미지 1/1

    • Take black covering off of battery.

    편집

  7. ZTE Blade Spark Screen Replacement: 6 단계, 이미지 1/2 ZTE Blade Spark Screen Replacement: 6 단계, 이미지 2/2

    • Unclip fastener located in the red box. Blunt end tweezers are recommended for this process.

    편집

  8. ZTE Blade Spark Screen Replacement: 7 단계, 이미지 1/2 ZTE Blade Spark Screen Replacement: 7 단계, 이미지 2/2

    • Remove battery so you are left with the base of the phone, the battery, and the battery cover separated.

    편집

  9. ZTE Blade Spark Screen Replacement: 8 단계, 이미지 1/1

    • Remove the 4mm screws in the 2 red circles shown with the Phillips #00 screwdriver.

    편집

  10. ZTE Blade Spark Screen Replacement: 9 단계, 이미지 1/1

    • Heat all 4 sides of the piece with the iOpener to loosen adhesive.

    편집

  11. ZTE Blade Spark Screen Replacement: 10 단계, 이미지 1/2 ZTE Blade Spark Screen Replacement: 10 단계, 이미지 2/2

    • Now remove the screen from it's base using the opening tool.

    편집
결론

Swap your old screen with your new screen. To reassemble your device with a new screen, follow these instructions in reverse order.

작성자

다른 기여자 1명과 함께

Solomon Barket

회원 가입일: 03/27/23

181 평판

안내서 1개 작성함

배지: 2

팀

IUPUI, Team 1-3, Harley Spring 2023 IUPUI, Team 1-3, Harley Spring 2023 회원

IUPUI-HARLEY-S23S1G3

3 회원들

안내서 3개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 1

30일 전: 2

전체 시간: 107