소개

The speaker has no sound. This guide will help to replace the speaker.

  1. Pry open the back case to get to the back cover. Remove eight 5mm screws with a PH0 screwdriver. Pry open  the  back cover with a plastic opening tool.
    • Pry open the back case to get to the back cover.

    • Remove eight 5mm screws with a PH0 screwdriver.

    • Pry open the back cover with a plastic opening tool.

    • Slide the plastic opening tool alongside the side seam twisting your hand forcefully to open the back cover.

    • Pry open by finding an edge and forcing it open with the plastic opening tool.

  2. Use a plastic opening tool to lift the press-fit connector up and disconnect the battery ribbon cable. Lift the battery up and remove it from the phone. Lift the battery up and remove it from the phone.
    • Use a plastic opening tool to lift the press-fit connector up and disconnect the battery ribbon cable.

    • Lift the battery up and remove it from the phone.

  3. US$100 이상 또는 Pro Tech Toolkit을 포함한 모든 주문의 배송은 무료입니다!

    상점 둘러보기
  4. Unplug wires with plastic opening tool  by pulling wires to the side. Unplug wires with plastic opening tool  by pulling wires to the side. Unplug wires with plastic opening tool  by pulling wires to the side.
    • Unplug wires with plastic opening tool by pulling wires to the side.

  5. Remove front speaker by using metal tweezers. Remove front speaker by using metal tweezers.
    • Remove front speaker by using metal tweezers.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

omar

회원 가입일: 2018년 10월 02일

717 평판

안내서 5개 작성하였습니다

조회 통계:

지난 24시간: 0

지난 7일: 0

지난 30일: 1

전체 시간: 57