주요 콘텐츠로 건너뛰기

이 안내서에는 최근 변경 사항이 더 있습니다. 최신 비검증 버전으로 전환하십시오.

Zeal Optics iON Motherboard Assembly Replacement

단지 전제 조건
이 안내서는 다른 가이드의 선행 작업으로 사용하기 위한 것입니다. 그 자체로는 불완전합니다.

필요한 것

  1. Zeal Optics iON Motherboard Assembly Replacement, Motherboard Assembly: 1 단계, 이미지 1/1
    • Remove the following four screws securing the back cover of the camera housing:

    • two silver 8.5 mm screws,

    • two black 8.8 mm screws.

  2. Zeal Optics iON Motherboard Assembly Replacement: 2 단계, 이미지 1/2 Zeal Optics iON Motherboard Assembly Replacement: 2 단계, 이미지 2/2
    • Peel the white sticker off the bottom of the camera housing.

  3. Zeal Optics iON Motherboard Assembly Replacement: 3 단계, 이미지 1/3 Zeal Optics iON Motherboard Assembly Replacement: 3 단계, 이미지 2/3 Zeal Optics iON Motherboard Assembly Replacement: 3 단계, 이미지 3/3
    • Lift the back cover off the camera housing and remove it.

  4. Zeal Optics iON Motherboard Assembly Replacement: 4 단계, 이미지 1/2 Zeal Optics iON Motherboard Assembly Replacement: 4 단계, 이미지 2/2
    • Use the tip of a spudger to pry up the retaining flap of the camera sensor cable ZIF connector on the motherboard.

    • Be sure that you are prying up on the hinged flap, not the connector itself.

  5. Zeal Optics iON Motherboard Assembly Replacement: 5 단계, 이미지 1/2 Zeal Optics iON Motherboard Assembly Replacement: 5 단계, 이미지 2/2
    • Pull the camera sensor ribbon cable straight out of its connector on the motherboard.

  6. Zeal Optics iON Motherboard Assembly Replacement: 6 단계, 이미지 1/3 Zeal Optics iON Motherboard Assembly Replacement: 6 단계, 이미지 2/3 Zeal Optics iON Motherboard Assembly Replacement: 6 단계, 이미지 3/3
    • Grab the edge of the motherboard and gently slide it out of the camera housing.

    • There may be some resistance due to the foam pad along the bottom of the camera housing.

결론

To reassemble your device, follow these instructions in reverse order.

David Hodson

회원 가입일: 04/13/10

150,467 평판

안내서 127개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 0

전체 시간: 6,008