주요 콘텐츠로 건너뛰기

Zenithink ZTPAD ZT280 C91 Back Panel Replacement

필요한 것

  1. Zenithink ZTPAD ZT280 C91 Back Panel Replacement, Back Panel: 1 단계, 이미지 1/1
    • Remove the two screws on the bottom using a Phillips #00 screwdriver.

    • For differentiation purposes, these screws are 4mm long.

  2. Zenithink ZTPAD ZT280 C91 Back Panel Replacement: 2 단계, 이미지 1/3 Zenithink ZTPAD ZT280 C91 Back Panel Replacement: 2 단계, 이미지 2/3 Zenithink ZTPAD ZT280 C91 Back Panel Replacement: 2 단계, 이미지 3/3
    • Using a spudger, start prying the case apart by working around the edge slowly.

    • Be careful not to damage any of the latches that hold the back panel in place, especially if you are using a metal spudger.

    • While prying, be careful to not lose the power and volume buttons; the case is the only thing holding them in place so they will easily come out once the panel has been removed

    • Be careful to not damage the speaker cables, they will still be connecting both panels.

결론

To reassemble your device, follow these instructions in reverse order.

다른 2명이 해당 안내서를 완성하였습니다.

Nicholas Davis

회원 가입일: 09/21/18

345 평판

안내서 2개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 0

7일 전: 0

30일 전: 1

전체 시간: 152