기기를 수리하세요 커뮤니티 상점

Zoomer Jurassic World Indominus Rex Back Cover Replacement

소개

Remove the back cover of the Zoomer Jurassic World Indominus Rex to get access to the motherboard, battery and the mechanical systems of the toy.

필요한 것

  1. Zoomer Jurassic World Indominus Rex Back Cover Replacement, Back Cover: 1 단계, 이미지 1/1

    • Turn off and unplug Zoomer Jurassic World Indominus Rex from any power source before doing replacements.

    • Remove all eight (8) 9.3mm Phillips screws using Phillips #1 screwdriver.

    편집

  3. Zoomer Jurassic World Indominus Rex Back Cover Replacement: 2 단계, 이미지 1/2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: 2 단계, 이미지 2/2

    • Pry apart the back cover of the Jurassic Indominus Rex and the rest of the body using a spudger.

    • Do not take out the back cover immediately as it it still attached to the motherboard by a wire.

    편집

  4. Zoomer Jurassic World Indominus Rex Back Cover Replacement: 3 단계, 이미지 1/2 Zoomer Jurassic World Indominus Rex Back Cover Replacement: 3 단계, 이미지 2/2

    • Disconnect the orange wire that connects the motherboard and the back cover.

    • Separate the back cover and the rest of the Zoomer Jurassic World Indominus Rex.

    • Gently press the tab on the side of the orange connector if you are having trouble disconnecting the wire.

    편집
결론

To reassemble your device, follow these instructions in reverse order.

작성자

다른 기여자 2명과 함께

Anh Le

회원 가입일: 01/20/16

504 평판

안내서 3개 작성하였습니다

배지: 12

배지 +9개 더

팀

USF Tampa, Team 10-3, Remmell Spring 2016 USF Tampa, Team 10-3, Remmell Spring 2016 회원

USFT-REMMELL-S16S10G3

4 회원들

안내서 14개 작성하였습니다

댓글 0개

댓글 쓰기

조회 통계:

24 시간 전: 1

7일 전: 5

30일 전: 7

전체 시간: 385