iPad 2 Wi-Fi EMC 2415 Front Panel Adhesive Strips Replacement 소개글 변경 사항
Andrew Optimus Goldheart- 에 의해 수정
편집 승인됨 완료자 Andrew Optimus Goldheart
- 이전
- 이후
- 변경 사항이 없습니다
| Introduction |
Replace the adhesive securing the front panel to the rear case of your iPad 2 Wi-Fi.
[ … ]
Before you begin peeling and sticking tape, it's important to have clean adhesion surfaces on both the front panel and the rear case. Use a spudger to scrape off any large excess bits of original adhesive, then clean all of the gluing surfaces with a paper towel and rubbing alcohol or Goof Off.
[ … ]
Throughout this procedure, it is recommended to peel up each adhesive strip as needed.
Replace the adhesive securing the front panel to the rear case of your iPad 2 Wi-Fi.
[ … ]
Before you begin peeling and sticking tape, it's important to have clean adhesion surfaces on both the front panel and the rear case. Use a spudger to scrape off any large excess bits of original adhesive, then clean all of the gluing surfaces with a paper towel and rubbing alcohol or Goof Off.
[ … ]
Throughout this procedure, it is recommended to peel up each adhesive strip as needed.
|