주요 콘텐츠로 건너뛰기

Motorola Moto X Pure Edition LCD and Digitizer Assembly Replacement 소개글 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다
Introduction
Use this guide to remove or replace the LCD and digitizer assembly in your Motorola Moto X Pure Edition.
'''For your safety, discharge your battery below 25% before disassembling your phone.''' This reduces the risk of a dangerous thermal event if the battery is accidentally damaged during the repair.
'''Before you begin, skip tolook at the last step''' and make sure your replacement part matches the one shown. This guide is for replacing a screen/display that is already installed in a new frame. If you bought a bare display instead, you will need to carefully separate your old display from your phone’s existing frame, and then glue the new display in. Those steps are not covered by this guide.