주요 콘텐츠로 건너뛰기

G&G AEG Shimming Guide Airsoft 소개글 변경 사항

101 Tech USA- 에 의해 수정

편집 승인됨 에 의해 101 Tech USA

삭제되었습니다
추가
변경 사항이 없습니다
Introduction
Shimming is basically the the task of placing your gear in such a distance from each gear will perform at it's best. What we airsofters call shims are in many ways more like little washers that goes on the axles of each gear. [ … ] The goal is to have the gear so that do not bounce meaning to go up and down or bind meaning that they are being pressed against each other and creating frictions. [ … ] The teeth of each gear also have to make good contact with each other if the teeth do not have only a small area of contact then that will put alot of pressure on a small area and cause the teeth to fail over time. [ … ] So you can imagine good shimming is one of the most important thing when it comes to having a long lasting reliable AEG.
Imageid
이전
이후