주요 콘텐츠로 건너뛰기

iPad 5 LTE Front Panel Assembly Replacement 소개글 변경 사항

Adam O'Camb- 에 의해 수정

편집 승인됨 완료자 Adam O'Camb

이전
이후
변경 사항이 없습니다
Introduction
Use this guide to replace the front glass and digitizer assembly on an iPad 5 LTE. [ … ] '''Note''' that since the Touch ID sensor in the home button is paired to the logic board, this guide includes instructions for removing the home button. In order to retain Touch ID functionality, you need to transfer the original home button to the new front panel assembly. [ … ] Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.
Use this guide to replace the front glass and digitizer assembly on an iPad 5 LTE. [ … ] '''Note''' that since the Touch ID sensor in the home button is paired to the logic board, this guide includes instructions for removing the home button. In order to retain Touch ID functionality, you need to transfer the original home button to the new front panel assembly. [ … ] Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.