주요 콘텐츠로 건너뛰기

Apple Watch Series 1 Force Touch Sensor Replacement 소개글 변경 사항

Tobias Isakeit- 에 의해 수정

편집 승인됨 완료자 Tobias Isakeit

이전
이후
변경 사항이 없습니다
기기
Apple Watch Series 1
Type
replacement
Thing
Force Touch Sensor
Title
Apple Watch Series 1 Force Touch Sensor Replacement
Introduction
Unfortunately, opening up your Apple Watch may damage the Force Touch Sensor, which also serves as a gasketing seal. The sensor is made up of two layers, glued together. These layers may separate when you open your watch, compromising its seal after reassembly. If this happens, you'll need to repair or replace the sensor before reassembling your watch.
Be sure to follow our [guide|41083] guide when you're done.
Time Required Min
1 시간
Time Required Max
2 시간
Imageid
이전
이후
Difficulty
Difficult
Conclusion
To continue reassembling your device, follow our [guide|41083] guide.
Author
Public
아니요
Summary
Replace or repair the Force Touch Sensor on your Apple Watch Series 1.

안내서 전제 조건

도구

  • iOpener x1 added.
  • iFixit Opening Tool x1 added.
  • iFixit Opening Picks (Set of 6) x1 added.
  • Curved Razor Blade x1 added.
  • Tweezers x1 added.
  • 1.0 mm Flathead Screwdriver x1 added.
  • Tri-point Y000 Driver Bit x1 added.

부품

  • Apple Watch (38 mm) Replacement Battery x1 added.
  • Apple Watch (42 mm, Original & Series 1) Replacement Battery x1 added.
  • Apple Watch Battery Connector Bracket x1 added.
  • Apple Watch (38 mm, Original & Series 1) Screen x1 added.
  • Apple Watch (42 mm, Original & Series 1) Screen x1 added.
  • Apple Watch (38 mm, Original & Series 1) Force Touch Sensor Adhesive Gasket x1 added.
  • Apple Watch (42 mm, Original & Series 1) Force Touch Sensor Adhesive Gasket x1 added.
  • Apple Watch (38 mm) Adhesive Strips x1 added.
  • Apple Watch (42 mm) Adhesive Strips x1 added.

플래그

  • In Progress added.