주요 콘텐츠로 건너뛰기
How to Repair a Stuck Trailer Jack 소개글
2020년 04월 14일 (화) 오후 01시 11분 56초
에 의해 수정
편집 승인됨 완료자
변경 사항이 없습니다
If your trailer jack is not operating correctly or stuck from corrosion or rust, this guide will show you how to disassemble the trailer jack and remove the rust that causes the trailer jack to become stuck or inoperable.
[ … ]
The trailer jack is consisted of two assemblies. The upper assembly that is used for support and protection of the screw assembly. The lower assembly contains the foot of the jack and the screw assembly of the jack. The screw is made of steel and over time will build up rust and cause the jack to not operate or become stuck. [ … ] Before using this guide, be sure to safely support the trailer that the jack is being removed from. This guide also includes the use of a die-grinder and eye and hand protection is suggested in the use of this equipment.
19 mm Box End Wrench x1 added.
1/2" Wrench x2 added.
Hammer x1 added.
Angle Grinder x1 Sanding pad and steel wire brush wheel added.
Anti-Seize Lubricant x1 added.
Spray Paint + Primer x1 added.