iMac Intel 24" EMC 2267 Graphics Card Replacement 소개글 변경 사항
Jeff Dickson- 에 의해 수정
편집 승인됨 완료자 Jeff Dickson
- 이전
- 이후
- 변경 사항이 없습니다
| Introduction |
When the VRAM on my early-2009 24" iMac went bad, I feared I might need to trash the machine. Some sources suggested the video card was soldered to the logic board but that may only be true of the base-model iMac. The ones with the nVidia and ATI upgrades are repairable/upgradable as illustrated in this guide.
[ … ]
You'll need to open the iMac, disconnect all cables from the logic board, remove all retaining screws from the logic board, remove the logic board, then replace the video card.
|
| Time Required Max |
1 시간
1 시간
|
| Conclusion |
reverse
reverse
|