주요 콘텐츠로 건너뛰기

소개 내역: MacBook Air 13" Early 2020 Microphone Array Replacement

편집자 Carsten Frauenheim-

편집 승인됨 완료자 Carsten Frauenheim

이전
이후
변경 사항 없음
기기
MacBook Air 13" Retina Display 2020
Type
replacement
Thing
Microphone Array
Title
MacBook Air 13" Late 2020 Microphone Array Replacement
Introduction
Use this guide to replace the microphone array assembly in a Late 2020 MacBook Air (M1).
'''To minimize risk of damage, turn on your MacBook and allow the battery to fully discharge before starting this procedure.''' A charged lithium-ion battery can be very dangerous if accidentally punctured. [[What to do with a swollen battery|If your battery looks puffy or swollen, take extra precautions.]]
'''Do not reuse the battery if it is swollen or was deformed in any way during the procedure.''' The battery is likely damaged and can be very dangerous to reuse—it should be replaced.
This guide involves removing the speakers and battery. You will need new adhesive to properly reinstall the speakers and battery.
Time Required Min
45 분
Time Required Max
2 시간
Imageid
이전
이후
Difficulty
Moderate
Conclusion
Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
'''To reassemble your device, follow the above steps in reverse order.'''
Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/MacBook%20Air%2013%22%20Late%202020|Answers community] for troubleshooting help.
Author
Public

도구

  • P5 Pentalobe Screwdriver Retina MacBook Pro and Air x1 added.
  • Spudger x1 added.
  • Tweezers x1 added.
  • T4 Torx Screwdriver x1 added.

부품

  • MacBook Air 13" (A2179, A2337 2020) Microphone x1 added.
  • Tesa 61395 Tape x1 added.

단계

단계 #: 1
이전
이후
단계 #: 2
이전
이후
단계 #: 3
이전
이후
단계 #: 4
이전
이후
단계 #: 5
이전
이후
단계 #: 6
이전
이후
단계 #: 7
이전
이후